legacycentral bbs

ooop yeah pics would be helpful.
thanks

and WHAT are the hose sizes? I want to redo them all in unbent hose.
EDIT found hose sz 7.5mm and 11.5mm

current status....


the lower hose wasn't long enuff, I found a metal sleeve in my parts bin and made a coupler

mmmk heres some pics





I used RV waste line

some big silicone tube. Good for IC's! http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7969887711&rd=1&sspagename=STRK%3AMEWA%3AIT http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7970636975&rd=1&sspagename=STRK%3AMEWA%3AIT Auction closed but check ...

For now its just floating in the engine compartment. I need to find a nice spot for it. and I'm not removing my washer bottle. I was playing around w/ my IC today, figuring out what I needed etc. relocated a few things, loosened the coolant bottle and coolant starts pooring everywhere. Damned if i w...

Any recomendations on dash kits? I've looked at the metra 99-8900 but it looks like its a 1.5 face, which I don't really care for. Thinking I may try the 1/2" DIN Pocket (88-00-9700) http://www.circuitcity.com/IMAGE/product/detail/met/EC.MET.88009700.JPG I looked at bestbuy, circuitcity and cru...

found a good deal on a set of these, nice looking wheel. Just wondering how they would look on my car.

nobody has an oil temp guage huh?
I'm going w/ a B&M tranny cooler w/ 1/2 npt fittings.

yeah, I get that but when were talking about 8' of pipe it seems like it might help.

I was thinking about pipe dia last night, I think 2.25 would be fine as the IC would be the most restrictive anyway.....still thinking.

I'm thinking the thick vs thin aluminum will act as a heat sink, cooling the air as it passes to the IC. It won't, they both have the same surface area. Not only that but the air spends a negligible amount of time in a pipe, especially under boost. mmk, the "surface area" makes perfect se...

I found some relatively thick walled aluminum tube which looks like the right sz for my IC.

I'm thinking the thick vs thin aluminum will act as a heat sink, cooling the air as it passes to the IC.

ok so what kind of oil temps are you guys getting?

OEM vs oil/air?

hmmm 3 different votes...
easy for you to say scottzg, I need my AC in CA

hmmm I'm confused. I saw the car, he had a Vishnu Stage 1 on it.
I need to check it w/ a mic.

oh that is suweet!!

am I crazy? I didnt have a mic, but laid a tape across it.
Anyone confirm or deny there is a difference?

I'm thinking in terms of cost, effeciency and ease of installation.
Since my 93 doesnt have one at all.

how much was the wrx cooler?

I just took my axle back off and laid it on the ground to compare to my "new" stock WRX so I could check for hanger locations and fitment.

The WRX pipe is smaller! WTF?

has it stopped raining yet?
I'm interested in pics of the added sections. getting ready to do mine.
I'd like to get it figured out so I can just weld it up in my driveway and bolt it in.

esplain DSX... are we talking about spikes/creep or just plain overboost? I mean is this unit a problem? I went w/ a hallman thinking it was one of the better ones.

heh, well I'm currently employed as a tow truck driver.... but cars of all kinds have always been a hobby/obsession.

I just got a hallman Es for $45 +$1.99 shipping! check out seller addictiveperformance on ebay he had 2 auctions- he had 40 es for BIN of $53 (i think) and another auction for 10 Make Offers, I offered $45, maybe you could get 1 for less! he also had Pro's etc http://stores.ebay.com/Addictive-Perfor...

yea, it replaces but doesnt the 3rd (elevation thingy) not work anymore once you remove the other lines? may as well just cap it off both on the black box and the selenoid.

I'm still looking at cheap yet effective MBC solutions.
http://www.dawesdevices.com/boost.html