Lots of 90-94 Legacy parts, Turbo and N/A
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Lots of 90-94 Legacy parts, Turbo and N/A
I have alot of parts for the 90-94 Legacys; interior trim, sensors, seats, doors, Diamond coil packs, TCU's, ECU's, heater coil, alts, suspension parts, dash board, A/C parts...........
Everthing but what you need, of course.
No power antennas, no turbo badges, no turbo wheels,
Everthing but what you need, of course.
No power antennas, no turbo badges, no turbo wheels,
Are the black triangle things where the window goes up split at the very top?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Yeah. they all should be black. Is the top ripped? That's my main concern. I'll try and take a pic of what I'm talking about.Blackbart wrote:Do you mean the plastic triangles that cover the mirror mounting screws? If that is what you need, I gottem. What color?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- In Neutral
- Posts: 25
- Joined: Sat May 21, 2005 3:09 pm
- Location: NYC
- Contact:
Hood
Do you have a hood to fit a 94 Legacy, and the rear trunk dampners?
Damm this does not feel like my Sti!
Re: Hood
I got the hood from the turbo with the scoop, trying to sell it as a facelift set with the bumper, grill, fenders, etc.v8killer2pt5 wrote:Do you have a hood to fit a 94 Legacy, and the rear trunk dampners?
Rear trunk dampners? Do you need the spring setup for the sedan or the shock type for the wagon? Have both.
-
- Second Gear
- Posts: 524
- Joined: Mon May 02, 2005 5:12 am
- Location: Fort Collins CO
Josh,Legacy777 wrote:Yeah. they all should be black. Is the top ripped? That's my main concern. I'll try and take a pic of what I'm talking about.Blackbart wrote:Do you mean the plastic triangles that cover the mirror mounting screws? If that is what you need, I gottem. What color?
I looked at the door, now I know what you want. The soft rubber between the mirror and the sail shaped plastic that covers the mirror mounting screws. Correct? Send me your adress and it's yours.
You were the first guy to help me out on the USMB with the code reading. Now it's payback time. Anything else you need, Josh?
-
- Fourth Gear
- Posts: 1162
- Joined: Tue Oct 15, 2002 3:49 pm
- Location: London (originally from Wash DC)
- Contact:
Ok, well I'm not sure I need it yet, so I will hold off for now.Blackbart wrote:I have one ECU (sniff, sniff), best offer over $150. I don't realy want to sell it.
'00 Impr RS - sold
'91 Legacy Turbo 5MT - mothballed
13psi, TurboXS TBE, WRX IC, Hallman MBC, TurboXS FCD, KYB AGX, Phil's STI seat, SPT short shifter, David Carter hood, Zeitronix widebandO2, Kuhmo rally tires, STI IC spray, thanks:gearboxtech.com
'91 Legacy Turbo 5MT - mothballed
13psi, TurboXS TBE, WRX IC, Hallman MBC, TurboXS FCD, KYB AGX, Phil's STI seat, SPT short shifter, David Carter hood, Zeitronix widebandO2, Kuhmo rally tires, STI IC spray, thanks:gearboxtech.com
Yeah the gussets. Here's a pic. However it doesn't show the rip at the topBlackbart wrote:Josh,Legacy777 wrote:Yeah. they all should be black. Is the top ripped? That's my main concern. I'll try and take a pic of what I'm talking about.Blackbart wrote:Do you mean the plastic triangles that cover the mirror mounting screws? If that is what you need, I gottem. What color?
I looked at the door, now I know what you want. The soft rubber between the mirror and the sail shaped plastic that covers the mirror mounting screws. Correct? Send me your adress and it's yours.
You were the first guy to help me out on the USMB with the code reading. Now it's payback time. Anything else you need, Josh?
http://www.main.experiencetherave.com:8 ... P_4254.JPG
If you have both left & right without tears at the top, I'd like both. Also could you send one of the screws that holds on the mirro. Some how one got lost on my passenger side.
That's about all I can think of. Thanks!
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Third Gear
- Posts: 993
- Joined: Fri Sep 03, 2004 12:41 am
- Location: Kent Ohio
-
- Third Gear
- Posts: 993
- Joined: Fri Sep 03, 2004 12:41 am
- Location: Kent Ohio
-
- First Gear
- Posts: 131
- Joined: Thu Feb 17, 2005 6:06 am