So I have an issue with my illumination on my dash, and my interior lights do not work either. Signals and headlights high and low work fine. I have replaced all my fuses, and the illumination control module. Any suggestions?.. or if anyone have a pin out for the cluster plugs I could just wire a switch to turn them on
Sent from my iPhone using Tapatalk
Illumination problem
Moderators: Helpinators, Moderators
Re: Illumination problem
Have you checked whether you have power to the illumination control module?
These wiring diagrams are for the 90 Legacy. If you have a 92-94 I can't guarantee they will be the same, but should be close/same.
https://main.experiencetherave.com/suba ... agrams.zip
These wiring diagrams are for the 90 Legacy. If you have a 92-94 I can't guarantee they will be the same, but should be close/same.
https://main.experiencetherave.com/suba ... agrams.zip
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm