Heads, valves, pistons, rods, crankshaft, etc...
Moderators: Helpinators , Moderators
inzomniac
First Gear
Posts: 133 Joined: Thu Dec 26, 2002 1:43 amLocation: Ontario, Canada
Post
by inzomniac Tue Apr 20, 2004 6:45 pm
Any foreign members with an owners manual or something to that accord tell me how much oil my ej20 should be taking, it's out of a 1st gen legacy...
Gary
rsstiboy
Second Gear
Posts: 428 Joined: Sun Apr 20, 2003 3:45 amLocation: Brisbane, Australia
Contact:
Post
by rsstiboy Tue Apr 20, 2004 10:25 pm
5ltrs
MY02 B4 Liberty, 2 1/2" off the primary with splitter, 3" off the secondary, 3" the rest of the way, completely stainless, k&n filter, ECUtek 3, 500HP walbro, 173kw@all4
inzomniac
First Gear
Posts: 133 Joined: Thu Dec 26, 2002 1:43 amLocation: Ontario, Canada
Post
by inzomniac Wed Apr 21, 2004 2:37 am
hmmm.. I put in just under 5 and I'm waaaay over... there was a pretty nice dent in the sump but I don't think that could take away that much capacity.
Gary
vrg3
Vikash
Posts: 12517 Joined: Sun Nov 03, 2002 2:13 amLocation: USA, OH, Cleveland (sometimes visiting DC though)
Contact:
Post
by vrg3 Wed Apr 21, 2004 2:51 am
I have a page from a 94 WRX service manual that lists 3.5 liters as the "lower level" and 4.5 liters as the "upper level."
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
MY92
Second Gear
Posts: 284 Joined: Tue Dec 30, 2003 4:24 amLocation: Auckland, New Zealand
Post
by MY92 Wed Apr 21, 2004 3:37 am
They say 4.5L in the manual.
John
inzomniac
First Gear
Posts: 133 Joined: Thu Dec 26, 2002 1:43 amLocation: Ontario, Canada
Post
by inzomniac Wed Apr 21, 2004 4:48 am
Not sure on the oil cooler.. I'll take a look.. Thanks for the help guys!
Gary
ej22t
Second Gear
Posts: 351 Joined: Tue Oct 15, 2002 1:38 pmLocation: Markham, Ont. Canada
Contact:
Post
by ej22t Thu Apr 22, 2004 7:48 am
I put nearly 5L on my turbo and it just above the top mark of the stick!
92 Legacy turbo with EJ20G engine swap \(^0^)/
