Can you send me a picture of the Canadian version, I found an issue while fitting it to the car today, The shape does not work because the roof still has structure for the sunroof that interferes. Perhaps the Canadian one is a slightly different shape ?mike-tracy wrote:Nice find! The canadian headliner is a couple steps above in quality, but it sounds like you got it (re)covered (pardon the pun).
91 SS to RSRA Spec bare shell complete restoration/build
Moderator: Moderators
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Time to start searchingNICO wrote:no more opening nicks build thread for me !... makes me want a legacy again
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: 91 SS to RSRA Spec bare shell complete restoration/build
BC622B05STI wrote:Can you send me a picture of the Canadian version, I found an issue while fitting it to the car today, The shape does not work because the roof still has structure for the sunroof that interferes. Perhaps the Canadian one is a slightly different shape ?mike-tracy wrote:Nice find! The canadian headliner is a couple steps above in quality, but it sounds like you got it (re)covered (pardon the pun).
The canadian one is slightly differently shaped, due to it not needing to fit around the automatic seatbelts. I have one installed in my car, I'll do my best to take pics.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Today I turned my attention to something that will put a smile on my face one day when I get to use it.... The Throttle pedal
Here are a few photos from the process
Here are a few photos from the process
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Today The Cusco parts came from Japan
The rear and front top mounts are camber adjustable although the rears have very little movement because of the size of the hole in shell, I may be able to move the position of the screws that hold the adjuster in the plate if needed. I will look at the camber once I have a rear subframe and lateral linksThe front ones have much more
adjustment.
The rear and front top mounts are camber adjustable although the rears have very little movement because of the size of the hole in shell, I may be able to move the position of the screws that hold the adjuster in the plate if needed. I will look at the camber once I have a rear subframe and lateral linksThe front ones have much more
adjustment.
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
Re: 91 SS to RSRA Spec bare shell complete restoration/build
-Such top notch work!
-Joe
-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Last night I finished assembling the steering column, I replated just a few of the parts
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: 91 SS to RSRA Spec bare shell complete restoration/build
I apologize for not getting a pic of my headliner... I am linking to Kimo's build thread - he has one and took a few pics:
http://bbs.legacycentral.org/viewtopic. ... 00#p305500
Particle board: USDM, gray plastic: CDM!
http://bbs.legacycentral.org/viewtopic. ... 00#p305500
Particle board: USDM, gray plastic: CDM!
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Thanks, I will need to do a custom one I think as I still have the lip in the roof from the sun roof but I want to have one that is for a car without a sunroof. I was just interested to know if there was a version that was different in shape to the one I have, it needs to be flat like the sunroof style, not raised for headroom above the seats like the one I have now.
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
This week has been a difficult one with the withdrawal of the Muscle Milk Picket racing from the Tudor series I am no Longer working for the team. I think given the chance we would have ran at the front again and challenged for wins. It was a great opportunity for me and winning the last ALMS championship before the merger of the two series was awesome. I am very disappointed that it ended like this and I hope that another opportunity like this will come soon. I will use this time to get more done on the Subaru, unfortunately The extra work from racing provided the much needed finances for this project
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Sorry to hear about that. Glad you are still positive though.
Tony
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
92ss satinsvoice wrote:LOL! that block was like F*** THIS! IM OUT!
mike-tracy wrote:Word. I'd love to get my hands on one of those trannies, but I just can't stomach the cost
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Today I fit the JDM front bumper cover as I am having a person from Subaru of America come and take photos with the possibility of doing a article on the project, unfortunately I do not have the correct bumper support etc for it but I want it to look as it will when it's finished. I have also finished almost all the trim on the car, the front cowl and rear wheel arch trim pieces are on and the trim above the front and rear windscreens are in place. The window washer bottle and hoses are in and I have a lot more parts comming from Subaru soon to finish a lot of the small detail pieces
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Nick,
Sorry to hear about the job. Did the team pull out from the series?
So the USDM bumper and foam piece does not fit the JDM bumper skin? Is the foam what is different? I think I've heard folks say the bumper beam is also smaller as well.
Sorry to hear about the job. Did the team pull out from the series?
So the USDM bumper and foam piece does not fit the JDM bumper skin? Is the foam what is different? I think I've heard folks say the bumper beam is also smaller as well.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
The foam piece does fit , the bumper beam is different, it's smaller and designed for the Air water Intercooler radiator so it's completely different.Legacy777 wrote:Nick,
Sorry to hear about the job. Did the team pull out from the series?
So the USDM bumper and foam piece does not fit the JDM bumper skin? Is the foam what is different? I think I've heard folks say the bumper beam is also smaller as well.
The team I worked for has withdrawn from the series so they had to let everyone go, although there are still a couple of guys left. I will use this time to work on the Legacy and see how much I can get done:-)
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Ok, thanks for the clarification.BC622B05STI wrote:The foam piece does fit , the bumper beam is different, it's smaller and designed for the Air water Intercooler radiator so it's completely different.
The team I worked for has withdrawn from the series so they had to let everyone go, although there are still a couple of guys left. I will use this time to work on the Legacy and see how much I can get done:-)
That's a bummer, but like you said, sounds like a good opportunity to work on the Legacy
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Here are a few photos that are up to date as of last night
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Absolutely gorgeous!
You will need to source the correct indicator lights also.
You will need to source the correct indicator lights also.
1994 ABM Sport Sedan-Not stock
1990 L series/turbo-Rally project
1990 L series/turbo-Rally project
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Today I received some parts from FedEx that I was very happy about, these are parts I had custom made by my friends at Aerodine Composites and they give the original set up a much more finished look. I am very happy with the result
Above is the original set up
Above is the original set up
Re: 91 SS to RSRA Spec bare shell complete restoration/build
So according to KBB, a 1991 Subaru Legacy Sport in excellent condition with 5 miles on it is worth $4,500.
I'll be generous and offer $5k whenever you are done.
I'll be generous and offer $5k whenever you are done.
Re: 91 SS to RSRA Spec bare shell complete restoration/build
^^ Ha ha ha. What a nice gesture.MConte05 wrote:So according to KBB, a 1991 Subaru Legacy Sport in excellent condition with 5 miles on it is worth $4,500.
I'll be generous and offer $5k whenever you are done.
Nick, those mirror panels are awesome! I'm always blown away at the detail in your build.
Any new news about the Subaru of America story?
Is that going to be in their Drive or Drive Performance magazine?
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
Heres the deal, The owner of Modesto Subaru came and looked at the car and he sent his Business manager over all his dealerships down to look at the car and took some pictures and now they are pushing to have Subaru Drive magazine come and photograph the car so at the moment he has been put in charge of trying to get some attention from Subaru so I will let you know if something happens with that but having the actual business manager working on it for me is great. The both agree that it is well worthy of some attention, so I am thankful for thatDominator wrote:^^ Ha ha ha. What a nice gesture.MConte05 wrote:So according to KBB, a 1991 Subaru Legacy Sport in excellent condition with 5 miles on it is worth $4,500.
I'll be generous and offer $5k whenever you are done.
Nick, those mirror panels are awesome! I'm always blown away at the detail in your build.
Any new news about the Subaru of America story?
Is that going to be in their Drive or Drive Performance magazine?
-
- Third Gear
- Posts: 892
- Joined: Thu May 03, 2012 6:24 am
- Location: Enumclaw, WA
- Contact:
Re: 91 SS to RSRA Spec bare shell complete restoration/build
yea i should say so. the level of detail is mind boggling! i always love looking at yours and nico's builds, you guys build the cars i wish i could! excited for you about subaru drive magazine, good luck!
Kris
'91 Mica White SS - R.I.P.
'88 White RX Turbo sedan - SOLD
'91 Black SS - SOLD
'93 Silver Turbo Wagon - Hibernation/Project Mode
'91 Black Camry Alltrac - R.I.P.
'09 DGM Forester XT Limited - Daily
'91 Mica White SS - R.I.P.
'88 White RX Turbo sedan - SOLD
'91 Black SS - SOLD
'93 Silver Turbo Wagon - Hibernation/Project Mode
'91 Black Camry Alltrac - R.I.P.
'09 DGM Forester XT Limited - Daily
Re: 91 SS to RSRA Spec bare shell complete restoration/build
So youra racecar driver? That muscle milk car is the tits
1991 subaru legacy sport sedan
-
- Second Gear
- Posts: 252
- Joined: Sat Oct 29, 2011 3:31 am
Re: 91 SS to RSRA Spec bare shell complete restoration/build
This weekend I was busy on the Legacy, I have painted the Trans Mount and the Diff and made a rear Strut brace out of a 2005 STI Impreza Brace.