legacycentral bbs

According to Exedy ... their Stage 1, Stage 2 Thick and Stage 2 Thin clutch kits as well as their Lightweight Flywheels are EXACTLY the same part numbers and size for both the 02-05 EJ20T WRX and the 91-94 EJ22T SS.

Alright, keep us posted. I'm also thinking of running 205/70-15 winter tires on my stock height Legacy Turbo. I suspect I'll have to roll the fenders a bit.

That's about 8% taller than the standard size. I suspect the tires will scrape the bottom of the spring perches. Can anyone offer any insight?

Removed from a 94 Legacy SS. In fully functional condition. I'm really not sure what this is worth but it could fix most intermittent problems related to the HVAC Controls.

Available for pickup in Toronto, Ontario, Canada or will ship at buyer's expense.

How about using a set of black, rubber/urethane flares from, let's say a Nissan pickup, and bolt them on? The'll give a clean finished look and hide all sorts of rust spots underneath. Thoughts?

SOLD - thank you everyone.

Thank you for all your interest. I've got the first two people lined up so these will likely be sold today.

*** SOLD ***
Thank you for all your interest.


I have a set of glass headlights from a RHD car. The glass and body is in excellent shape but the lower tabs (where the bottom of the grill rests) are broken.

$50 shipped from Toronto, Ontario, Canada.

I don't know terrence and philip just yet. I do know Nuwan and Ben ... both good rally guys.

If I was making a profit, I wouldn't mind sharing!

Pics Sent to New92 ...

Thanks for the free bump, MagicMike.

New price US$100 shipped anywhere in USA or Canada.

Daniel Son - yes, it is still available. Please PM your email address if you want pics. Thanks,

magicmike - thank you for the thumbs up.

Still available ... still awaiting questions, pics requests and offers!

C$275 obo. 15x6, 55+ offset. A set of four straight and round wheels with the usual wear and tear. They have a polished finish and include all centre caps. These were my winter wheels but only for one season. They are structrully fine, do not leak air and look just fine from 5 feet. Just good, solid...

SOLD - thank you.

Update: This setup is still available and I'm getting more and more motivated to consider offers.

I will only charge C$15 to ship anywhere in Canada and C$25 to ship anywhere in the lower 48 States. I'll pay for any excess shipping charges.

Please take it off my hands.

Canadian $325 obo. I have a set of four flawless wheels with no rubs or curb rashes and including all centre caps. These are not the flat face ones – there is a slight dish effect. I’m not sure how else to describe this. From what I think, they will clear only WRX breaks and nothing bigger. Please c...

Yep. Still available. All PM's replied to and pics sent.

Shipping is no more than US$30 for all 48 States so I will charge you less if you are closer to Toronto, Ontario, Canada.

I need one fuel injector to replace a bad one in my jdm ej20T. The numbers on the top say A(or O)805 and 24150. Another number A46-00 appears next to 'Made in Japan'. Do these numbers give enough information about the injector? Please let me know if you've got a spare (known good) one lying around. ...

napphappy is right - the symptoms I saw by mixing the injectors were classic lean symptoms. But I think my test did confirm that the one injector I took out is in fact bad. So it is time to look for a used unit. Except I don't know what to look for: How does one identify an injector for part # etc -...

I removed one of the original EJ22T injectors and, even though it looked different and the connector was upside down, I installed it into the EJ20T rail. A short, unspirited drive around the neighborhood throws not CEL codes and the engine seems to have normal power. The only thing is, there is a bi...

Good point about the clicking noise. I noticed it right away after the swap and I didn't even need a stethiscope. In fact, I could simply touch the fuel filter, the fuel lines or any injector and feel the clicking vibrations. So I guess I'll swap in one of the original EJ22T injectors. Or should I s...

So the jdm ej20 in my 94 Leggy SS running on the ej22 ecu and harness is throwing a 14 cel code: 'Injector 1 is returning abnormal signal'. I pulled out the offending injector and it did look a bit dirty. I don't really know what it should look like anyway. What should be my next move? Pull out all ...

Pics sent to those who PM'd me. Please send PM if you'd like to get the pics. Thanks.