Fog Light Switch

Saskatoon Subaru · Post by **Saskatoon Subaru** » Wed Aug 22, 2007 3:31 am

ok i've done some searching on this but i have found any real helpful so i ask this

thats what i'm looking for now i found these part numbers from years ago that dscoobydoo supplied in this forum (http://bbs.legacycentral.org/viewtopic. ... fog+lights) but i'm not sure if there what i'm looking for

PN: 83002AA040, 83003AA020ML, 83003AA000

so can anyone help me out.

Thanks

dscoobydoo · Post by **dscoobydoo** » Wed Aug 22, 2007 3:58 am

I am not sure of the Canada dealerships, but I ordered the last ones here in the US.

You will want to take those numbers to your dealership and see what they can make of it.

The numbers might even be different.
I just went to the dealership, told them the car, and what piece I wanted. They did the rest of the work.

Saskatoon Subaru · Post by **Saskatoon Subaru** » Wed Aug 22, 2007 4:40 am

could you tell me what part number give's you what item?

subaru_styles · Post by **subaru_styles** » Wed Aug 22, 2007 5:11 am

i punched in thoose part#'s

83002AA040 - SWITCH AY

83003AA020ML - SWITCH CASE

83003AA000 - PLUG

i need that piece as well for my fog switch and edm headlight leveler's

Saskatoon Subaru · Post by **Saskatoon Subaru** » Wed Aug 22, 2007 1:44 pm

ok the switch case would give you the case

the switch ay = ?

and the plug is the button?

dscoobydoo · Post by **dscoobydoo** » Wed Aug 22, 2007 2:47 pm

Switch ay is the switch assembly, the plug is for a blank plate to put in the other hole.

When it came as a unit, you bought the plate, the fog switch and a plug for the second hole.

Saskatoon Subaru · Post by **Saskatoon Subaru** » Wed Aug 22, 2007 11:22 pm

thanks, for the help

Saskatoon Subaru · Post by **Saskatoon Subaru** » Thu Aug 23, 2007 1:33 am

where would i get the wiring harness i guess you'd call it, to go into the back of the switch

dscoobydoo · Post by **dscoobydoo** » Thu Aug 23, 2007 4:28 am

Junkyard switch. They all have the same wiring in the back: cruise and rear defog will work.

smh0101 · Post by **smh0101** » Wed Sep 05, 2007 6:56 am

today i used those three part #s and they all checked out. I bought the switch case and the blank plug so I should get them on Thursday. I will post pics then.
Cost me damn near $40 for 2 friggin plastic peices dammit.

dscoobydoo · Post by **dscoobydoo** » Wed Sep 05, 2007 8:37 pm

Amazed you could get them.
I was told the dealer's don't have any more in inventory in the US.

Guess I was lied to.

smh0101 · Post by **smh0101** » Fri Sep 07, 2007 1:33 am

Gottem today and they are definitly right!

dscoobydoo · Post by **dscoobydoo** » Fri Sep 07, 2007 2:42 am

Sweet!

smh0101 · Post by **smh0101** » Sat Sep 15, 2007 5:58 am

dscooby...
How did you wire your switch... Does it light up with the dimmer?
When you push it does it light up?

dscoobydoo · Post by **dscoobydoo** » Sat Sep 15, 2007 7:53 pm

Yes on both questions.

You should be able to splice into the harness wires behind the switch for the dimmer lights.

As for the other wires: run a positive accessory wire through the switch and out the other end into the engine bay.
You will need to run a ground out for the light indicator on the switch.

Then put the relay in the engine compartment and run a accessory on from the fusebox to the relay and then out to the light.

If you have any other questions, shoot me a PM

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Fog Light Switch

Fog Light Switch