tps replacement

dirtyhandssubaru555 · Fri Dec 28, 2007 11:52 pm

so i got a good tps on the way, i was told not to mess with takeing the tps off unless you know what u are doing, but it doenst look that difficult. two screws, mark the srcews and the old tps and match up with mark with the new tps. yes or no?

vrg3 · Post by **vrg3** » Fri Dec 28, 2007 11:57 pm

You can't go by the marks necessarily. You need to calibrate the idle switch when you install the new TPS. Josh has posted a few times on how to do that.

dirtyhandssubaru555 · Post by **dirtyhandssubaru555** » Sat Dec 29, 2007 4:54 am

vikash are are you stocking me? lol! i did a search and didnt see much. josh?

vrg3 · Post by **vrg3** » Sat Dec 29, 2007 5:19 am

Just trying to help.

Josh is Legacy777.

http://bbs.legacycentral.org/viewtopic. ... 0825#10825
http://bbs.legacycentral.org/viewtopic. ... 5903#65903
http://bbs.legacycentral.org/viewtopic. ... 9095#69095
http://bbs.legacycentral.org/viewtopic. ... 179#191179
http://bbs.legacycentral.org/viewtopic. ... 711#232711

dirtyhandssubaru555 · Post by **dirtyhandssubaru555** » Sun Dec 30, 2007 9:00 pm

so if i don't get any reading from pins one and two on the tps, does that meen its totaly craped out? when i unplug it the car runs just the same. i didn't do any more testing cause i was being lazy last night and didnt want to start a fire in my garage

Post by **Legacy777** » Wed Jan 02, 2008 4:42 pm

Do you get continuity when you move the throttle?

Are you sure you're orienting the TPS correctly, and using the correct pins?

dirtyhandssubaru555 · Wed Jan 02, 2008 11:34 pm

i get nothing at all from pins 1 and 2, thats what my hanes has to start with.

Post by **Legacy777** » Thu Jan 03, 2008 7:11 pm

Did you look at the posts and links in the posts above to see if the info in there matches to Haynes?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

tps replacement

tps replacement