legacycentral bbs

Hello, I'm new to the group and I'm hoping for some help. I own a 90
2.2 automatic Legacy and I'm in the process of doing the head gaskets
on it. While I have it apart I'm doing the timing belt, all
gaskets/seals, cleaning up the ports and blueprinting the manifolds.
I have but one question, does anyone know if anybody has a set of
performance cams for my car? I don't want anything to wild, justa bit
hotter than stock. Any info would help. Thanks,CSA


------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/k6cvND/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

I have had the cams in my Naturally Aspirated 2.2 reground by a
camshaft shop. Not sure of exact specs, but they were groud to about
a stage 3 grind. The result from this was a much stronger powerband
throughout the whole rev-range, i am quite happy with the result!
It cost $100Australian per cam for the grind, and should be a pretty
similar cost over there.
George, Australia

--- In BC-BFLegacyWorks@y..., "theallsman5" <theallsman5@y...> wrote:
> Hello, I'm new to the group and I'm hoping for some help. I own a
90
> 2.2 automatic Legacy and I'm in the process of doing the head
gaskets
> on it. While I have it apart I'm doing the timing belt, all
> gaskets/seals, cleaning up the ports and blueprinting the
manifolds.
> I have but one question, does anyone know if anybody has a set of
> performance cams for my car? I don't want anything to wild, justa
bit
> hotter than stock. Any info would help. Thanks,CSA


------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/k6cvND/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Thanks George. I also found out about a place called PAECO Ind. and
they look like they might be the ticket to what I want. A little
pricey, so I'm still looking around. If anyone knowsof any other
place here in thestates plz let me know. Thanks,CSA


--- In BC-BFLegacyWorks@y..., "georgerbyrne" <georgerbyrne@y...>
wrote:
> I have had the cams in my Naturally Aspirated 2.2 reground by a
> camshaft shop. Not sure of exact specs, but they were groud to
about
> a stage 3 grind. The result from this was a much stronger powerband
> throughout the whole rev-range, i am quite happy with the result!
> It cost $100Australian per cam for the grind, and should be a
pretty
> similar cost over there.
> George, Australia
>
> --- In BC-BFLegacyWorks@y..., "theallsman5" <theallsman5@y...>
wrote:
> > Hello, I'm new to the group and I'm hoping for some help. I own a
> 90
> > 2.2 automatic Legacy and I'm in the process of doing the head
> gaskets
> > on it. While I have it apart I'm doing the timing belt, all
> > gaskets/seals, cleaning up the ports and blueprinting the
> manifolds.
> > I have but one question, does anyone know if anybody has a set of
> > performance cams for my car? I don't want anything to wild, justa
> bit
> > hotter than stock. Any info would help. Thanks,CSA


------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/k6cvND/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com