well......I'm getting a good deal on them. They normally run more. Not sure what goin price is. But if they fit and such, I definitely need some better seats. The standard legacy seats are not for performance.
Josh
-----Original Message-----
From: georgerbyrne [mailto:
georgerbyrne@yahoo.com]
Sent: Wed 6/5/2002 3:29 AM
To:
BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether WRX seats will fit in a BC-BF legacy
Gees, they're cheap over there!!!!
The going rate over here is about $600-$800 for a pair of front WRX
seats
And yet we have soooo many more WRX's!
George.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> He want's $250 for them. Which is a really good price. I need to
double check on measurements and such to make sure everything works,
and they won't look too shitty.
>
> I'd have to drive up to dallas area to get them....but no biggy.
How do they look in the car? I was debating on gettin them re-
ulpolstered.
>
> josh
>
> -----Original Message-----
> From: dealerxing [mailto:saitam@n...]
> Sent: Tue 6/4/2002 7:55 PM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] Re: Urgent, need to know whether
WRX seats will fit in a BC-BF legacy
>
>
>
> How much are you getting them for? I got them for
$300/pair. One of
> the seats has some rips on the back though, not very
noticeable.
> They were taken out since day 1 but one of them was damaged
before
> delivery.
>
> --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...>
wrote:
> > Thanks for the info.
> >
> > I need to take some measures and such when I get back in
town. He
> used the rails, so I would have to use the Legacy rails. I
need to
> look more closely at things.
> >
> > Josh
> >
> > -----Original Message-----
> > From: dealerxing [mailto:saitam@n...]
> > Sent: Tue 6/4/2002 9:23 AM
> > To: BC-BFLegacyWorks@y...
> > Cc:
> > Subject: [BC-BFLegacyWorks] Re: Urgent, need to know
whether
> WRX seats will fit in a BC-BF legacy
> >
> >
> >
> > I have WRX front seats in my USDM Legacy Turbo.
> >
> > You have to swap the seatbelt buckles if you have the
> automatic
> > seatbelts. Legacy seat has 5 mounting holes, WRX
seat only
> has four
> > on each, so one is unused. Once they are in they
will be
> much taller
> > than your Legacy seats.
> >
> > --- In BC-BFLegacyWorks@y..., "georgerbyrne"
> <georgerbyrne@y...>
> > wrote:
> > > They will bolt straight in!
> > > No prob's/mods at all!
> > >
> > > You may have to bolt the rear inside bolts through
the
> current
> > > seatbelt plug mounts, but other than that they are
the same
> holes!
> > > George, Australia.
> > >
> > > --- In BC-BFLegacyWorks@y..., "milehial2000"
> <acroxford@h...> wrote:
> > > > I think you will be able to make them fit we
have done
> a lot
> > of
> > > > conversion work and that involved installing
Legacy and
> good
> > > > Loyale seats into just about any subie from
about '83 up.
> You
> > might
> > > > have to make some steel brackets if the width is
not the
> same. We
> > > used
> > > > to take 3" flat steel and run it across the
bottom and
> then mount
> > > the
> > > > rails to that and it worked great.
> > > > AL(CO)
> > > >
> > > >
> > > >
> > > > --- In BC-BFLegacyWorks@y..., "Josh Colombo"
<josh@s...>
> wrote:
> > > > > Title says pretty much what's up. I can get a
pretty
> good deal
> > > on
> > > > some WRX seats. They are definitely better then
my old
> worn
> > legacy
> > > > seats, which are meant for a wider body then
mine, plus
> are just
> > > old.
> > > > The seats don't come with the brackets, sliders
and such,
> as he
> > > used
> > > > them for his spacaros. I would assume I could
just bolt
> them up
> > to
> > > my
> > > > brackets........but I am not really sure. I
would need
> to rig
> > > > something with the little bottom seat belt holder
thing
> on mine,
> > so
> > > it
> > > > doesn't go all the way back.
> > > > >
> > > > > Other thing is my interior is tan.....seats are
goin to
> be
> > black
> > > and
> > > > gray......not the best combo........anyone have
any info
> on
> > > > re-upulstering.....or even just like a pull over
type
> covers that
> > > look
> > > > good.....I know they're out there.....just have
not dealt
> with
> > any.
> > > > >
> > > > > Thanks guys
> > > > >
> > > > > Josh
> >
> >
> > ------------------------ -------
--------
> ------~-->
> > Kwick Pick opens locked car doors,
> > front doors, drawers, briefcases,
> > padlocks, and more. On sale now!
> >
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> > ------------------------------------------------------
--------
> -------~->
> >
> > To unsubscribe from this group, please send an email
to:
> > BC-BFLegacyWorks-unsubscribe@e...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
>
http://docs.yahoo.com/info/terms/
>
>
> ------------------------ ---------------
------~-->
> Kwick Pick opens locked car doors,
> front doors, drawers, briefcases,
> padlocks, and more. On sale now!
>
http://us.click.yahoo.com/ehaLqB/Fg5DAA ... /XoTolB/TM
> --------------------------------------------------------------
-------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com