No. They will not work.
The brakes from each car (ie. WRX or legacy) will bolt up to pretty much any subie.......assuming you have the bracket, caliper from that specific car, and that your wheels will clear the caliper.
You can't mix-match brake pads from a WRX to a legacy, or caliper from a WRX to bracket from a legacy.
Josh
-----Original Message-----
From: gessner18 [mailto:
gessner17@aol.com]
Sent: Mon 6/10/2002 12:21 PM
To:
BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Re: Brakes,
So WRX braks will work with legacy calipers or not?
Matt
--- In BC-BFLegacyWorks@y..., "georgerbyrne" <georgerbyrne@y...>
wrote:
> One of them can just slide and it will simply sit in place. The
other
> one is a longer one that has a thread in the end of it. This one
> screws in and stops the other from sliding off. If you just look
at
> them, you will figure it out pretty quickly!
> George, Australia.
>
> --- In BC-BFLegacyWorks@y..., "gessner18" <gessner17@a...> wrote:
> > How does it hold the caliper in since there are no threads?
> > Matt
> > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > > Yeah.....there are two pins that bolt on to the bracket, you
need
> > both
> > > of them to hold on the caliper.
> > >
> > > Josh
> > >
> > > ************************************
> > > Josh Colombo
> > > Josh@s... <mailto:Josh@s...>
> > >
> > > "Life, an ever-changing melody
> > > of beats and rhythm" - ME
> > > ************************************
> > >
> > >
> > > -----Original Message-----
> > > From: gessner18 [mailto:gessner17@a...]
> > > Sent: Sunday, June 09, 2002 7:17 PM
> > > To: BC-BFLegacyWorks@y...
> > > Subject: [BC-BFLegacyWorks] Re: Brakes,
> > >
> > >
> > > Thats the piece, the bracket it does have one hole with
threads,
> > do
> > > I just need sliding pins or how do i adapt it to it?
> > >
> > > --- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> > > > What do you mean by braces?
> > > >
> > > > There is the caliper portion......there is a bracket that the
> > > caliper
> > > > mounts to, and in which mounts to the car.
> > > >
> > > > For the WRX calipers there are two sliding guide pins that
the
> > > caliper
> > > > slides on.....hence free floating caliper.
> > > >
> > > > The brackets for the WRX are different, it sounds like he
didn't
> > > send
> > > > you the proper brackets.....or did not send you all the
parts.
> > > >
> > > > Josh
> > > >
> > > > ************************************
> > > > Josh Colombo
> > > > Josh@s... <mailto:Josh@s...>
> > > >
> > > > "Life, an ever-changing melody
> > > > of beats and rhythm" - ME
> > > > ************************************
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: gessner18 [mailto:gessner17@a...]
> > > > Sent: Sunday, June 09, 2002 6:44 PM
> > > > To: BC-BFLegacyWorks@y...
> > > > Subject: [BC-BFLegacyWorks] Brakes,
> > > >
> > > >
> > > > I bought WRX rotors, pads and braces for my 93 legacy touring
> > > wagon
> > > > (turbo). The guy that sold them to me from the parts place
told
> > > me
> > > > everything would fit. When I tried to put the braces on, the
> > > bolts
> > > > that go through the brace to the caliper were different, the
new
> > > > braces had no threads on one end, did I get the wrong parts
or
> > did
> > > > the guy just not know what he was talking about. Do I need
a
> > new
> > > > bolt kit? I was told it was interchangable from other
sources
> > > also,
> > > > but not from what I can see, let me know if you have some
info.
> > > > Matt
> > > >
> > > >
> > > > To unsubscribe from this group, please send an email to:
> > > > BC-BFLegacyWorks-unsubscribe@e...
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > >
http://docs.yahoo.com/info/terms/
> > >
> > >
> > > To unsubscribe from this group, please send an email to:
> > > BC-BFLegacyWorks-unsubscribe@e...
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > >
http://docs.yahoo.com/info/terms/
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com