legacycentral bbs

Posted: **Fri Jun 28, 2002 4:36 pm**

Well again i will try. It's 2 months earlier than last time i
announced, so this time we should be able to comit by november
..heh caue we keep running into the holiday season, and then
everyones money get diverted else where.

So again with the help of A.B.E who are used to the jerking around
by now are ready to do this..at the same price. 30bucks a square
foot. These are for the first gen Legacys 90-91 i still haven't been
able to come up with a 92-94 donor car..but hopefully soon.

RS Hood.
$319.98 New Hood.
$67.00 Ver. 4, 5 & 6 Bonnet Scoop
$112.00 22B Bonnet Vent Replica
Hood is 9.0sqft with vents and scoop
$270.00 Mold
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
Total Cost for 5 people: 1174.00
Individual Cost:235.00
6people:1255/210.00
7people:1336/191.00
+50 dollars shipping (includes Canada)
+100 international (everywhere else)

And the Front Bumper Skin:

RS Bumper
240.00 2001 RS Bumper
Bumper is 9.2 sqft after modification to fit wheel well (legacy
bumper is bigger wigth wise)
276.00 Mold
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
Total Cost for 5 people: 930.00
Individual Cost: 186.00
6people:1012.80/168.80
7people:1095.60/156.51
+50 dollars shipping (includes Canada)
+100 international (everywhere else)

Once we get 5 people for each catagory we will start the group
buy. IF ANYBODY HAS ANY QUESTIONS FEEL FREE TO ASK
HERE ON FORUM, OR PRIVATELY at : Bussaca@fast.net

Also in a bid to get more interest i will be advertiseing on the
ultimate subaru forum as well. so we might snagg one or two
people from off there.

David Carter
91 Subaru Legacy LS WGN 2.2l FWD
87 Subaru RX LS SDN 1.8T D/R 4wd

Posted: **Fri Jun 28, 2002 10:06 pm**

Count me in for a hood. Again.

-Sambo

-----Original Message-----
From: Bussaca@fast.net [mailto:Bussaca@fast.net]
Sent: Friday, June 28, 2002 1:32 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] FIberglass Parts. again..

Well again i will try. It's 2 months earlier than last time i
announced, so this time we should be able to comit by november
..heh caue we keep running into the holiday season, and then
everyones money get diverted else where.

So again with the help of A.B.E who are used to the jerking around
by now are ready to do this..at the same price. 30bucks a square
foot. These are for the first gen Legacys 90-91 i still haven't been
able to come up with a 92-94 donor car..but hopefully soon.

RS Hood.
$319.98 New Hood.
$67.00 Ver. 4, 5 & 6 Bonnet Scoop
$112.00 22B Bonnet Vent Replica
Hood is 9.0sqft with vents and scoop
$270.00 Mold
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
Total Cost for 5 people: 1174.00
Individual Cost:235.00
6people:1255/210.00
7people:1336/191.00
+50 dollars shipping (includes Canada)
+100 international (everywhere else)

And the Front Bumper Skin:

RS Bumper
240.00 2001 RS Bumper
Bumper is 9.2 sqft after modification to fit wheel well (legacy
bumper is bigger wigth wise)
276.00 Mold
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
Total Cost for 5 people: 930.00
Individual Cost: 186.00
6people:1012.80/168.80
7people:1095.60/156.51
+50 dollars shipping (includes Canada)
+100 international (everywhere else)

Once we get 5 people for each catagory we will start the group
buy. IF ANYBODY HAS ANY QUESTIONS FEEL FREE TO ASK
HERE ON FORUM, OR PRIVATELY at : Bussaca@fast.net

Also in a bid to get more interest i will be advertiseing on the
ultimate subaru forum as well. so we might snagg one or two
people from off there.

David Carter
91 Subaru Legacy LS WGN 2.2l FWD
87 Subaru RX LS SDN 1.8T D/R 4wd

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sat Jun 29, 2002 12:36 pm**

David,

may want to advertise on i-club.....maybe in the legacy forum or what not.....it's up to you.

I may be in this round.....for the 90-91 style hood. I know you prob covered it before, but do you have a pic of what the hood will look like? Or with the various hood scoops?

Also, just a quick question, do you need to run hood pins with this hood? I know it's a race look, but I'm not too keen on it for my car.

I may be up in your neck of the woods in august, I'll try and shoot ya an email when I get back in town next week.

Josh

-----Original Message-----
From: Bussaca@fast.net [mailto:Bussaca@fast.net]
Sent: Fri 6/28/2002 3:31 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] FIberglass Parts. again..

Well again i will try. It's 2 months earlier than last time i
announced, so this time we should be able to comit by november
..heh caue we keep running into the holiday season, and then
everyones money get diverted else where.

So again with the help of A.B.E who are used to the jerking around
by now are ready to do this..at the same price. 30bucks a square
foot. These are for the first gen Legacys 90-91 i still haven't been
able to come up with a 92-94 donor car..but hopefully soon.

RS Hood.
$319.98 New Hood.
$67.00 Ver. 4, 5 & 6 Bonnet Scoop
$112.00 22B Bonnet Vent Replica
Hood is 9.0sqft with vents and scoop
$270.00 Mold
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
Total Cost for 5 people: 1174.00
Individual Cost:235.00
6people:1255/210.00
7people:1336/191.00
+50 dollars shipping (includes Canada)
+100 international (everywhere else)

And the Front Bumper Skin:

RS Bumper
240.00 2001 RS Bumper
Bumper is 9.2 sqft after modification to fit wheel well (legacy
bumper is bigger wigth wise)
276.00 Mold
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
Total Cost for 5 people: 930.00
Individual Cost: 186.00
6people:1012.80/168.80
7people:1095.60/156.51
+50 dollars shipping (includes Canada)
+100 international (everywhere else)

Once we get 5 people for each catagory we will start the group
buy. IF ANYBODY HAS ANY QUESTIONS FEEL FREE TO ASK
HERE ON FORUM, OR PRIVATELY at : Bussaca@fast.net

Also in a bid to get more interest i will be advertiseing on the
ultimate subaru forum as well. so we might snagg one or two
people from off there.

David Carter
91 Subaru Legacy LS WGN 2.2l FWD
87 Subaru RX LS SDN 1.8T D/R 4wd

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sat Jun 29, 2002 2:36 pm**

On 29 Jun 2002, at 11:26, Josh Colombo wrote:

To: <BC-BFLegacyWorks@yahoogroups.com>
From: "Josh Colombo" <josh@surrealmirage.com>
Date sent: Sat, 29 Jun 2002 11:26:55 -0500
Subject: RE: [BC-BFLegacyWorks] FIberglass Parts. again..
Send reply to: BC-BFLegacyWorks@yahoogroups.com

> David,
>
> may want to advertise on i-club.....maybe in the legacy forum or what
> not.....it's up to you.

Aye thanks i forgot about them..
>
> I may be in this round.....for the 90-91 style hood. I know you prob
> covered it before, but do you have a pic of what the hood will look like?
> Or with the various hood scoops?

Actually there all the photo's up on the BC-BF list on it's yahoo
group web page. under fiberglass
>
> Also, just a quick question, do you need to run hood pins with this hood?
> I know it's a race look, but I'm not too keen on it for my car.

The hood will be strong enough to run under all the stock
mountings ...but incase something gose wrong or you get in an
accedent fiberglass dosen't bend it shatters and any thing that will
keep the hood part of the car and not air borne will only help.

but you don't have to if you don't want em.. it's just an
recomendation.
>
> I may be up in your neck of the woods in august, I'll try and shoot ya an
> email when I get back in town next week.
>
> Josh
>

Look forward to it.

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sat Jun 29, 2002 7:56 pm**

On 29 Jun 2002, at 11:26, Josh Colombo wrote:

To: <BC-BFLegacyWorks@yahoogroups.com>
From: "Josh Colombo" <josh@surrealmirage.com>
Date sent: Sat, 29 Jun 2002 11:26:55 -0500
Subject: RE: [BC-BFLegacyWorks] FIberglass Parts. again..
Send reply to: BC-BFLegacyWorks@yahoogroups.com

> David,
>
> may want to advertise on i-club.....maybe in the legacy forum or what not.....it's up to you.

I tryied A: the don't want groupbuys announced anywhere but in the
groupbuy section ... and B: they won't let any group buys in that
they don't have there fingeres in.. Only SPONCERED vendors are
alowed to offer group buys.. and the ony way to be a sponcer it to
donate $$$ to the i club.. so they can go F#ck them selves.

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sun Jun 30, 2002 12:46 am**

Yeah,

I thought of that after I told ya. Post in the Legacy forum. Don't post as a group buy......just tell them you are curious or gaging interest on how many people would be interested in such and product and have them email you, or check out this group. There's nothing against that. Also anyone that is goin to be interested will be in the Legacy forum. Dave is the mod, and is pretty laxed......or at least I think he is

Josh

-----Original Message-----
From: Bussaca@fast.net [mailto:Bussaca@fast.net]
Sent: Sat 6/29/2002 6:52 PM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: RE: [BC-BFLegacyWorks] FIberglass Parts. again..

On 29 Jun 2002, at 11:26, Josh Colombo wrote:

To: <BC-BFLegacyWorks@yahoogroups.com>
From: "Josh Colombo" <josh@surrealmirage.com>
Date sent: Sat, 29 Jun 2002 11:26:55 -0500
Subject: RE: [BC-BFLegacyWorks] FIberglass Parts. again..
Send reply to: BC-BFLegacyWorks@yahoogroups.com

> David,
>
> may want to advertise on i-club.....maybe in the legacy forum or what not.....it's up to you.

I tryied A: the don't want groupbuys announced anywhere but in the
groupbuy section ... and B: they won't let any group buys in that
they don't have there fingeres in.. Only SPONCERED vendors are
alowed to offer group buys.. and the ony way to be a sponcer it to
donate $$$ to the i club.. so they can go F#ck them selves.

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/3PCXaC/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Thu Jul 18, 2002 6:50 am**

Just an Update as of today (7/18/02) we have

4 people interested in the hood scoop and vents (that includes my
self)

and

3 people interested in the RS bumper (this # also inludes myself)

Just want to keep you guys up to date with whats happening

David Carter

------------------------ ---------------------~-->
Will You Find True Love?
Will You Meet the One?
Free Love Reading by phone!
http://us.click.yahoo.com/ps3dMC/R_ZEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Thu Jul 18, 2002 7:40 am**

what's going on with the hood scoop and vents? have been out of the loop as of late....

----- Original Message -----
From: Bussaca@fast.net
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Thursday, July 18, 2002 6:46 AM
Subject: RE: [BC-BFLegacyWorks] FIberglass Parts. again..

Just an Update as of today (7/18/02) we have

4 people interested in the hood scoop and vents (that includes my
self)

and

3 people interested in the RS bumper (this # also inludes myself)

Just want to keep you guys up to date with whats happening

David Carter

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=228862.2128520.35 ... 6-1039-302>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Posted: **Thu Jul 18, 2002 10:30 am**

I thought you guys already finished that deal? Why such a long delay? E-mail
me with the price breaks I might want a a bumper but most likely the hood
and vents if you are still doing the hood and vents the reason I question is
that you only said hood scoop and vents not hood with scoop & vents. Let me
know.
thanks
Ian
smotocon@hotmail.com

>From: Bussaca@fast.net
>Reply-To: BC-BFLegacyWorks@yahoogroups.com
>To: BC-BFLegacyWorks@yahoogroups.com
>Subject: RE: [BC-BFLegacyWorks] FIberglass Parts. again..
>Date: Thu, 18 Jul 2002 06:465 -0400
>
>Just an Update as of today (7/18/02) we have
>
>4 people interested in the hood scoop and vents (that includes my
>self)
>
>and
>
>3 people interested in the RS bumper (this # also inludes myself)
>
>Just want to keep you guys up to date with whats happening
>
>David Carter
>

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/TPvn8A/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Thu Jul 18, 2002 11:50 am**

It has been determined that the hood you are creating can NOT fit on
a 92 legacy correct?
-Adam

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/TPvn8A/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Thu Jul 18, 2002 5:30 pm**

On 18 Jul 2002, at 15:45, adamarchibald wrote:

To: BC-BFLegacyWorks@yahoogroups.com
From: "adamarchibald" <adam@mymindseye.ca>
Date sent: Thu, 18 Jul 2002 15:458 -0000
Subject: [BC-BFLegacyWorks] Re: FIberglass Parts. again..
Send reply to: BC-BFLegacyWorks@yahoogroups.com

> It has been determined that the hood you are creating can NOT fit on
> a 92 legacy correct?
> -Adam
>
>
very correct

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/wlyPtD/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Fri Jul 19, 2002 2:20 pm**

Count me in for a bumper!

Dan

------------------------ ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/wlyPtD/PfREAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Fri Jul 19, 2002 3:20 pm**

Oh hell, I wanna bumper tooo!!!! And if it don't fit my 93, I'll
just have to get it adjusted

------------------------ ---------------------~-->
Access Your PC from Anywhere - Free Trial
http://us.click.yahoo.com/o5uw2C/0ncEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sat Jul 20, 2002 12:50 am**

--- In BC-BFLegacyWorks@y..., "shemeryahu" <shemaryahu@c...> wrote:
> Oh hell, I wanna bumper tooo!!!! And if it don't fit my 93, I'll
> just have to get it adjusted

It should fit size wise, you might have to do some "minor" shaving or
filling, 92-94 are a bit rounder but not by much and i believe all
the mountings are differant. But i put you on the list, and i'll e-
mail you privately about something else.

David Carter

------------------------ ---------------------~-->
Discover Remote PC Acess Now
http://us.click.yahoo.com/p5uw2C/1ncEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sat Jul 20, 2002 12:50 am**

Is there a price breakdown for the fiberglass parts?

John Dolinga
www.SunnyGulf.com
-----Original Message-----
From: bussaca1 [mailto:Bussaca@fast.net]
Sent: Saturday, July 20, 2002 12:41 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: FIberglass Parts. again..

--- In BC-BFLegacyWorks@y..., "shemeryahu" <shemaryahu@c...> wrote:
> Oh hell, I wanna bumper tooo!!!! And if it don't fit my 93, I'll
> just have to get it adjusted

It should fit size wise, you might have to do some "minor" shaving or
filling, 92-94 are a bit rounder but not by much and i believe all
the mountings are differant. But i put you on the list, and i'll e-
mail you privately about something else.

David Carter

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

ADVERTISEMENT
<http://rd.yahoo.com/M=228862.2128520.35 ... 6-1039-302>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Posted: **Sat Jul 20, 2002 4:20 am**

--- In BC-BFLegacyWorks@y..., "John D" <Drive@S...> wrote:
> Is there a price breakdown for the fiberglass parts?
>
> John Dolinga
> www.SunnyGulf.com

RS Hood.
$319.98 New Hood.
$67.00 Ver. 4, 5 & 6 Bonnet Scoop
$112.00 22B Bonnet Vent Replica
Hood is 9.0sqft with vents and scoop
$270.00 Mold
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
Total Cost for 5 people: 1174.00
Individual Cost:235.00
6people:1255/210.00
7people:1336/191.00
+50 dollars shipping (includes Canada)
??? Depends on destination for international (everywhere else)

And the Front Bumper Skin:

RS Bumper
240.00 2001 RS Bumper
Bumper is 9.2 sqft after modification to fit wheel well (legacy
bumper is bigger wigth wise)
276.00 Mold
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
Total Cost for 5 people: 930.00
Individual Cost: 186.00
6people:1012.80/168.80
7people:1095.60/156.51
+50 dollars shipping (includes Canada)
??? Depends on destination for international (everywhere else)

David Carter

------------------------ ---------------------~-->
Access Your PC from Anywhere - Free Trial
http://us.click.yahoo.com/o5uw2C/0ncEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sat Jul 20, 2002 6:40 am**

Subject: RE: [BC-BFLegacyWorks] FIberglass Parts. again..
Date sent: Sat, 20 Jul 2002 06:309 -0400

On 18 Jul 2002, at 7:23, Ian Shastko wrote:

To: BC-BFLegacyWorks@yahoogroups.com
BCC to: From: "Ian Shastko" <smotocon@hotmail.com>
Date sent: Thu, 18 Jul 2002 07:23:48 -0700 Subject: RE:
[BC-BFLegacyWorks] FIberglass Parts. again.. Send reply to:
BC-BFLegacyWorks@yahoogroups.com

> I thought you guys already finished that deal?

Nope it never got off the runway we keep getting stalled for 5
people that christmas hits and everyones money gets tied up.
which is why i tried getting started earlier this year.

Why such a long delay? E-mail
> me with the price breaks I might want a a bumper but most likely the
> hood and vents if you are still doing the hood and vents the reason I
> question is that you only said hood scoop and vents not hood with scoop
> & vents. Let me know.

I meant fiberglass hood WITH scoop and vents.

David Carter

Posted: **Sat Jul 20, 2002 10:00 am**

Does anyone have an idea on how well the front bumper will fit a 91 sport sedan? Will it go on easily? Does anyone know where I can see some pic of this?

John Dolinga
www.SunnyGulf.com
-----Original Message-----
From: bussaca1 [mailto:Bussaca@fast.net]
Sent: Saturday, July 20, 2002 4:12 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: FIberglass Parts. again..

--- In BC-BFLegacyWorks@y..., "John D" <Drive@S...> wrote:
> Is there a price breakdown for the fiberglass parts?
>
> John Dolinga
> www.SunnyGulf.com

RS Hood.
$319.98 New Hood.
$67.00 Ver. 4, 5 & 6 Bonnet Scoop
$112.00 22B Bonnet Vent Replica
Hood is 9.0sqft with vents and scoop
$270.00 Mold
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
$81.00 Positive (i.e part)
Total Cost for 5 people: 1174.00
Individual Cost:235.00
6people:1255/210.00
7people:1336/191.00
+50 dollars shipping (includes Canada)
??? Depends on destination for international (everywhere else)

And the Front Bumper Skin:

RS Bumper
240.00 2001 RS Bumper
Bumper is 9.2 sqft after modification to fit wheel well (legacy
bumper is bigger wigth wise)
276.00 Mold
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
$82.80 Positive (i.e part)
Total Cost for 5 people: 930.00
Individual Cost: 186.00
6people:1012.80/168.80
7people:1095.60/156.51
+50 dollars shipping (includes Canada)
??? Depends on destination for international (everywhere else)

David Carter

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/> Terms of Service.

ADVERTISEMENT
<http://rd.yahoo.com/M=231082.2206868.36 ... g22lp.tmpl>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Posted: **Sat Jul 20, 2002 6:10 pm**

On 20 Jul 2002, at 9:53, John D wrote:

To: <BC-BFLegacyWorks@yahoogroups.com>
From: "John D" <Drive@SunnyGulf.com>
Date sent: Sat, 20 Jul 2002 09:53:32 -0400
Subject: RE: [BC-BFLegacyWorks] Re: FIberglass Parts. again..
Send reply to: BC-BFLegacyWorks@yahoogroups.com

> Does anyone have an idea on how well the front bumper will fit a 91
> sport sedan? Will it go on easily? Does anyone know where I can see some
> pic of this?
>
The Bumper is an 2001 RS bumper Shaved and modified to fit an
90-91 legacy (sdn or wgn) perfectly, useing stock mounts. It will
install quite easily. This is not just an rs bumper, this is a Modified
RS bumper recast in fiberglass made to fit the 90-91 legacy
models.

i will send you pics.

David Carter

------------------------ ---------------------~-->
Access Your PC from Anywhere - Free Trial
http://us.click.yahoo.com/o5uw2C/0ncEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sat Jul 20, 2002 10:20 pm**

about the bumper... would the styrofoam behind the bumper still be the same, or is it different with the 2k1 bumper?

----- Original Message -----
From: Bussaca@fast.net
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Saturday, July 20, 2002 65 PM
Subject: RE: [BC-BFLegacyWorks] Re: FIberglass Parts. again..

On 20 Jul 2002, at 9:53, John D wrote:

To: <BC-BFLegacyWorks@yahoogroups.com>
From: "John D" <Drive@SunnyGulf.com>
Date sent: Sat, 20 Jul 2002 09:53:32 -0400
Subject: RE: [BC-BFLegacyWorks] Re: FIberglass Parts. again..
Send reply to: BC-BFLegacyWorks@yahoogroups.com

> Does anyone have an idea on how well the front bumper will fit a 91
> sport sedan? Will it go on easily? Does anyone know where I can see some
> pic of this?
>
The Bumper is an 2001 RS bumper Shaved and modified to fit an
90-91 legacy (sdn or wgn) perfectly, useing stock mounts. It will
install quite easily. This is not just an rs bumper, this is a Modified
RS bumper recast in fiberglass made to fit the 90-91 legacy
models.

i will send you pics.

David Carter

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

ADVERTISEMENT
<http://rd.yahoo.com/M=228862.2128520.35 ... 6-1039-302>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

zZz <http://docs.yahoo.com/info/terms/> .

Posted: **Sat Jul 20, 2002 11:40 pm**

--- In BC-BFLegacyWorks@y..., "devin kundla" <devinstarted@h...>
wrote:
> about the bumper... would the styrofoam behind the bumper still be
the same, or is it different with the 2k1 bumper?

It'll be just the bumper skin that will be changed. The 2001 RS
bumper skin will be made to fit over your exsisting hardware. all
safety equipment will not be changed. Nothing major will have to be
changed out.

David C

------------------------ ---------------------~-->
Access your PC just like Web Mail
http://us.click.yahoo.com/r5uw2C/zncEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Sun Jul 21, 2002 1:20 am**

David,

Can you email the pics of the bumper as well?

************************************
Josh Colombo
Josh@surrealmirage.com <mailto:Josh@surrealmirage.com>

"Life, an ever-changing melody
of beats and rhythm" - ME
************************************

-----Original Message-----
From: bussaca1 [mailto:Bussaca@fast.net]
Sent: Saturday, July 20, 2002 10:39 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: FIberglass Parts. again..

--- In BC-BFLegacyWorks@y..., "devin kundla" <devinstarted@h...>
wrote:
> about the bumper... would the styrofoam behind the bumper still be
the same, or is it different with the 2k1 bumper?

It'll be just the bumper skin that will be changed. The 2001 RS
bumper skin will be made to fit over your exsisting hardware. all
safety equipment will not be changed. Nothing major will have to be
changed out.

David C

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

------------------------ ---------------------~-->
Discover Remote PC Acess Now
http://us.click.yahoo.com/p5uw2C/1ncEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com