legacycentral bbs

I know this is an obscure question, but does anyone
know the wiring of the throttle position sensor (on a
90 Legacy L Wagon 4wd) What resistances I should read
at the various pins at idle and at WOT? The Chilton's
manual seems to have it wrong - gee that never happens


Sam
90 Legacy L Wagon 4wd


--- Kam <kam@subarunutter.com> wrote:
> Ben - don't worry it's just an ongoing discussion
> I've been having with
> dave. Hope you get a good sale cos it's a very
> deal.
>
>
>
> ----- Original Message -----
> From: ej22t
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Wednesday, September 18, 2002 1:34 PM
> Subject: [BC-BFLegacyWorks] Re: Does anyone know
>
>
> Hi Kam, I don't think the manifold needs the fix
> pipe, since I look
> into some Japanese Magz.
> Ben
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an email
> to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>


__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com

------------------------ ---------------------~-->
Looking for a more powerful website? Try GeoCities for $8.95 per month.
Register your domain name (http://your-name.com). More storage! No ads!
http://geocities.yahoo.com/ps/info
http://us.click.yahoo.com/aHOo4D/KJoEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Pin one and two are the closed throttle indicator. These should be connected
when the throttle is .29 from the stop screw and open when the throttle is
.32 from the stop screw.

Measure the resistance from pin 3 to pin 4 and make sure the transition is
smooth from closed to open. I think this is most important over a specific
value.

To measure total resistance measure from pin 2 to pin 3. I dont have the
specific value but I could measure one of mine if you like.

I have a picture of the unit available, but someone has probably already
scanned it so I wont recreate the work yet.

--
yOya

> -----Original Message-----
> From: Samuel Reed [mailto:cowapultsam@yahoo.com]
> Sent: Wednesday, September 18, 2002 6:41 AM
> To: BC-BFLegacyWorks@yahoogroups.com
> Subject: [BC-BFLegacyWorks] Wiring of Throttle Position Sensor
>
>
> I know this is an obscure question, but does anyone
> know the wiring of the throttle position sensor (on a
> 90 Legacy L Wagon 4wd) What resistances I should read
> at the various pins at idle and at WOT? The Chilton's
> manual seems to have it wrong - gee that never happens
>
>
> Sam
> 90 Legacy L Wagon 4wd
>
>
> --- Kam <kam@subarunutter.com> wrote:
> > Ben - don't worry it's just an ongoing discussion
> > I've been having with
> > dave. Hope you get a good sale cos it's a very
> > deal.
> >
> >
> >
> > ----- Original Message -----
> > From: ej22t
> > To: BC-BFLegacyWorks@yahoogroups.com
> > Sent: Wednesday, September 18, 2002 1:34 PM
> > Subject: [BC-BFLegacyWorks] Re: Does anyone know
> >
> >
> > Hi Kam, I don't think the manifold needs the fix
> > pipe, since I look
> > into some Japanese Magz.
> > Ben
> >
> >
> >
> > ADVERTISEMENT
> >
> >
> >
> >
> > To unsubscribe from this group, please send an email
> > to:
> > BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service.
> >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! News - Today's headlines
> http://news.yahoo.com
>
> ------------------------
> ---------------------~-->
> Looking for a more powerful website? Try GeoCities for $8.95
> per month.
> Register your domain name (http://your-name.com). More
> storage! No ads!
> http://geocities.yahoo.com/ps/info
> http://us.click.yahoo.com/aHOo4D/KJoEAA ... /XoTolB/TM
> --------------------------------------------------------------
> -------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>


------------------------ ---------------------~-->
Plan to Sell a Home?
http://us.click.yahoo.com/J2SnNA/y.lEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Let me correct that with info from the Service Manuals.

Connector 2-3 should be 3/12 kilo ohm

Connector 2-4
throttle full closed 10-12 kilo ohm
throttle full open 3-5 kilo ohm


--
yOya

> -----Original Message-----
> From: ciper [mailto:ciper@hotpop.com]
> Sent: Wednesday, September 18, 2002 12:16 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Subject: RE: [BC-BFLegacyWorks] Wiring of Throttle Position Sensor
>
>
> Pin one and two are the closed throttle indicator. These
> should be connected
> when the throttle is .29 from the stop screw and open when
> the throttle is
> .32 from the stop screw.
>
> Measure the resistance from pin 3 to pin 4 and make sure the
> transition is
> smooth from closed to open. I think this is most important
> over a specific
> value.
>
> To measure total resistance measure from pin 2 to pin 3. I
> dont have the
> specific value but I could measure one of mine if you like.
>
> I have a picture of the unit available, but someone has
> probably already
> scanned it so I wont recreate the work yet.
>
> --
> yOya
>
> > -----Original Message-----
> > From: Samuel Reed [mailto:cowapultsam@yahoo.com]
> > Sent: Wednesday, September 18, 2002 6:41 AM
> > To: BC-BFLegacyWorks@yahoogroups.com
> > Subject: [BC-BFLegacyWorks] Wiring of Throttle Position Sensor
> >
> >
> > I know this is an obscure question, but does anyone
> > know the wiring of the throttle position sensor (on a
> > 90 Legacy L Wagon 4wd) What resistances I should read
> > at the various pins at idle and at WOT? The Chilton's
> > manual seems to have it wrong - gee that never happens
> >
> >
> > Sam
> > 90 Legacy L Wagon 4wd
> >
> >
> > --- Kam <kam@subarunutter.com> wrote:
> > > Ben - don't worry it's just an ongoing discussion
> > > I've been having with
> > > dave. Hope you get a good sale cos it's a very
> > > deal.
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: ej22t
> > > To: BC-BFLegacyWorks@yahoogroups.com
> > > Sent: Wednesday, September 18, 2002 1:34 PM
> > > Subject: [BC-BFLegacyWorks] Re: Does anyone know
> > >
> > >
> > > Hi Kam, I don't think the manifold needs the fix
> > > pipe, since I look
> > > into some Japanese Magz.
> > > Ben
> > >
> > >
> > >
> > > ADVERTISEMENT
> > >
> > >
> > >
> > >
> > > To unsubscribe from this group, please send an email
> > > to:
> > > BC-BFLegacyWorks-unsubscribe@egroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > > Terms of Service.
> > >
> > >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! News - Today's headlines
> > http://news.yahoo.com
> >
> > ------------------------
> > ---------------------~-->
> > Looking for a more powerful website? Try GeoCities for $8.95
> > per month.
> > Register your domain name (http://your-name.com). More
> > storage! No ads!
> > http://geocities.yahoo.com/ps/info
> > http://us.click.yahoo.com/aHOo4D/KJoEAA ... /XoTolB/TM
> > --------------------------------------------------------------
> > -------~->
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
> ------------------------
> ---------------------~-->
> Plan to Sell a Home?
> http://us.click.yahoo.com/J2SnNA/y.lEAA ... /XoTolB/TM
> --------------------------------------------------------------
> -------~->
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



------------------------ ---------------------~-->
4 DVDs Free +s&p Join Now
http://us.click.yahoo.com/pt6YBB/NXiEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Here's info from the FSM's

http://www.main.experiencetherave.com:8 ... sting1.jpg
http://www.main.experiencetherave.com:8 ... sting2.jpg
http://www.main.experiencetherave.com:8 ... sting3.jpg

The resistance readings at closed and WOT are sorta not as important as getting the throttle on/off switch setup correctly. I believe that info is on the last scan.

Josh

-----Original Message-----
From: Samuel Reed [mailto:cowapultsam@yahoo.com]
Sent: Wed 9/18/2002 8:40 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: [BC-BFLegacyWorks] Wiring of Throttle Position Sensor



I know this is an obscure question, but does anyone
know the wiring of the throttle position sensor (on a
90 Legacy L Wagon 4wd) What resistances I should read
at the various pins at idle and at WOT? The Chilton's
manual seems to have it wrong - gee that never happens


Sam
90 Legacy L Wagon 4wd


--- Kam <kam@subarunutter.com> wrote:
> Ben - don't worry it's just an ongoing discussion
> I've been having with
> dave. Hope you get a good sale cos it's a very
> deal.
>
>
>
> ----- Original Message -----
> From: ej22t
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Wednesday, September 18, 2002 1:34 PM
> Subject: [BC-BFLegacyWorks] Re: Does anyone know
>
>
> Hi Kam, I don't think the manifold needs the fix
> pipe, since I look
> into some Japanese Magz.
> Ben
>
>
>
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, please send an email
> to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>


__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com

------------------------ ---------------------~-->
Looking for a more powerful website? Try GeoCities for $8.95 per month.
Register your domain name (http://your-name.com). More storage! No ads!
http://geocities.yahoo.com/ps/info
http://us.click.yahoo.com/aHOo4D/KJoEAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com