Page 1 of 1
Rim size suggestion
Posted: Wed May 26, 2004 8:22 pm
by georgeperez38
Hi everyone-
I have a 93 Legacy L (FWD) with the stock 14" rims. I want to upgrade. From experience, would 17" rims fit without any additional mods? And on the issue of ride, would there be a noticable ride difference between 17" tires to 16" tires?
Thanks
Posted: Wed May 26, 2004 8:48 pm
by mTk
I had 17s on my 92 when it was fwd. They fit fine w/o additional modifcation.
The ride won't be much different between 16 and 17. I say go w/ a good looking set of 17s, however people here will tell you that 17s are too heavy and bad for your car etc.. stock WRX wheels will be recommended, but they are fugly
MK
Posted: Wed May 26, 2004 9:05 pm
by mTk
7 or 7.5" width is recommended, offest should be at least 48mm
MK
Posted: Wed May 26, 2004 9:31 pm
by georgeperez38
Thanks for the info MK.
Can you E-mail off list @
georgeperez38@cox.net
Have a quick question and site to send you to see if these rims are the right ones.
Thanks
Posted: Thu May 27, 2004 5:26 am
by MY92
17's are heavy unless they are RG's or TE37s
I've got a nice set of 16x7+47 Advan RG's and they weigh a good 2kg's lighter than the factory 15's with tires.
Posted: Thu May 27, 2004 5:40 am
by BAC5.2
17's are generally thought to be the best size for Autocross. Small enough sidewall without being TO short, and without being TO heavy.
The only downside is going to be the 45 series sidewall. That's not going to be the most comfortable sidewall you can have, it'll be a pretty harsh ride.
Posted: Thu May 27, 2004 2:40 pm
by Legacy777
17's are too big IMO for a car that had 14" come stock.
Turbo legacy is difference since it came with 15" stock. But that's just my opinion.
Posted: Thu May 27, 2004 5:46 pm
by LegacyT
Sorry to Hijack, but does anybody know the weight of Legacy GT rims and stock Legacy turbo rims? Just curious.
Thanks,
Mark
Posted: Thu May 27, 2004 8:57 pm
by MY92
about 16kg w/ tire.
Posted: Fri May 28, 2004 12:09 am
by georgeperez38
So what I'm hearing is that 17" might not be a good idea. And that 16" would be better?
Thanks
Posted: Fri May 28, 2004 12:24 am
by MY92
It is whatever you make of it, function or form?
Function first myself.
Posted: Mon May 31, 2004 2:54 am
by georgeperez38
One last question then. I'm looking at this rim size 16X7 5-100 45S. Tire size 205/50R-16 91V . Will this combination work for 93 Legacy L Sedan?
Thanks.
Posted: Mon May 31, 2004 4:36 am
by MY92
Yes
Posted: Mon May 31, 2004 5:08 am
by scottzg
perfect!
Just make sure that the offset is 50-58mm. Otherwise it's kind of hard on your wheel bearings and might look funny.
Posted: Mon May 31, 2004 5:39 am
by MY92
Nothing wrong with my 47 offset. Sits perfectly flush with the body.
Posted: Tue Jun 01, 2004 2:42 pm
by georgeperez38
Cool. Thanks guys. I'll go ahead and run with what I have. Just out of curiosity, have you guys (and gals) had an problems with wheel bearings after 160,000 miles?
Thanks for your help everyone.
Posted: Tue Jun 01, 2004 6:55 pm
by evolutionmovement
Original wheel bearings here with slightly incorrect offset since 110k.
Steve