legacycentral bbs

Posted: **Tue Jun 08, 2004 3:14 pm**

hi my name is jimmy and i come from chicoutimi in canada and my english is very bad...
i have a problem with my "console" with the button a/c vent... when i push "vent button" the air (dry ?) came from the same place (in my face)
when i push "defrost" the air come in my face too
somebody have this problem???? help me!!!!

and im sorry for my english

bye bye

Posted: **Tue Jun 08, 2004 3:15 pm**

sorry i have a subaru legacy 1992 ls

Posted: **Tue Jun 08, 2004 6:10 pm**

Hi Jimmy,

Welcome.

You may want to read over this thread I posted. I have/had similar issues.
http://bbs.legacycentral.org/viewtopic. ... light=hvac

I have had the problem occur again. I've been told that it's the pins in the back of the connector. To permantly fix it. They need to be soldered back to the circuit board.

Posted: **Tue Jun 08, 2004 7:26 pm**

thank you

do you have a picture to help me?????

i will try to learn and resolve the problem
a+

Posted: **Tue Jun 08, 2004 11:15 pm**

I think I have a spare hvac unit......I'll try and look for it, and take a picture of what I'm talking about....where the pins/connector are.

Posted: **Wed Jun 09, 2004 2:37 am**

Legacy777 wrote:I think I have a spare hvac unit......I'll try and look for it, and take a picture of what I'm talking about....where the pins/connector are.

thanks a lot

and i'm happy to have this information

a+

Posted: **Thu Jun 10, 2004 1:42 am**

Here's a pic of the hvac unit and the pins. It's not the one with the pig tail. It's the one that's on the back of the unit.

http://www.main.experiencetherave.com:8 ... cunit1.jpg
http://www.main.experiencetherave.com:8 ... cunit2.jpg
http://www.main.experiencetherave.com:8 ... cunit3.jpg

Posted: **Thu Jun 10, 2004 2:22 pm**

Legacy777 wrote:Here's a pic of the hvac unit and the pins. It's not the one with the pig tail. It's the one that's on the back of the unit.

http://www.main.experiencetherave.com:8 ... cunit1.jpg
http://www.main.experiencetherave.com:8 ... cunit2.jpg
http://www.main.experiencetherave.com:8 ... cunit3.jpg

k, thank you

a+

Posted: **Thu Jun 10, 2004 5:43 pm**

it would be easier to just buy a new one probably

Posted: **Thu Jun 10, 2004 6:23 pm**

depends on how handy you are with a soldering iron.

Posted: **Fri Aug 27, 2004 1:29 am**

i think i have discover my problem

when i touch someting wire (wire connect to the hvac unit) my hvac unit stop

someone have wirering diagram for my legacy 92
and if you don't understand it's my fault i have too much problem with my english
a+
thanks

Jimmy

Posted: **Fri Aug 27, 2004 4:07 am**

Not sure if this will have the electrical diagrams you need, but you can take a look
http://www.main.experiencetherave.com:8 ... ectrical)/

legacycentral bbs

a/c,vent..etc

a/c,vent..etc