Page 1 of 1
2.6 motor update
Posted: Thu Jul 08, 2004 3:50 am
by kelley
just thought I would update those that are interested in the 2.6 motor build. well it is being prerun on the engine dyno.
with a tdo4 at 10-12 psi with a very conservative tune it is makeing 350 hp and sipping on california 91 octane. as you all know the tdo4's limit is pretty much 300 hp. i am very imprerssed and can't wait to see what it will do at 40 psi with the turbo that I have for it and on ethanol.
Posted: Thu Jul 08, 2004 4:25 am
by georryan
HOLY SCHMACK!!
Posted: Thu Jul 08, 2004 4:50 am
by kastrix
I'll take two!!! J/k i would be interested in seing moire about it tho
Posted: Thu Jul 08, 2004 5:29 am
by legacy92ej22t
Sweet!
Posted: Thu Jul 08, 2004 1:11 pm
by NICO
thats nuts but does it go faster then your legacy?
Posted: Thu Jul 08, 2004 2:53 pm
by THAWA
I thought this was his legacy
Posted: Thu Jul 08, 2004 3:12 pm
by mTk
It is for the legacy iirc, hard to tell if it's faster nico, it's on an engine dyno.
MK
Posted: Thu Jul 08, 2004 3:25 pm
by douglas vincent
Kelly, are you in Portland? Whos dyno are you using?
Posted: Thu Jul 08, 2004 5:50 pm
by kelley
douglas, I am in tigard/hillsboro.
I am not using anyones dyno around here. my engine builder/supplier has an engine dyno. I am trying to scrape together the funds to get a dynapak.
nico , yes this motor will be much stronger than the ej22g.
it is estimated to make 900hp at 30 psi. so we'll see.
Posted: Thu Jul 08, 2004 5:52 pm
by THAWA
What block are you using?
Posted: Thu Jul 08, 2004 6:12 pm
by kelley
the block is a 2.0 ltr (wrc) block.
Posted: Thu Jul 08, 2004 6:15 pm
by THAWA
holy chamoise!
Posted: Thu Jul 08, 2004 6:31 pm
by georryan
Oh gee whiz I think <looks down> yep, just peed my pants.
That's crazy cool.
Posted: Thu Jul 08, 2004 6:31 pm
by georryan
On a side note, how is the wrc block different than any other block?
Posted: Thu Jul 08, 2004 8:27 pm
by kelley
georryan wrote:Oh gee whiz I think <looks down> yep, just peed my pants.
That's crazy cool.
well the cylinder walls are much stronger amongst other things (I can't remember right now)
Posted: Thu Jul 08, 2004 8:55 pm
by BAC5.2
When can we expect a Perfection Motorsports 2.4L Stroker kit for the EJ22t?
Posted: Thu Jul 08, 2004 9:18 pm
by kelley
that is somtething that will be on our website and will be stocked in the future. I just need to get some other projects out of the way before this will be done. there is so much to do and not enough time to do it all. I am also working on a turbo kit for the 600rr
if anyone is interested in a short block they can contact me and I can work up a quote. but no set prices and specific builds as of now.
Posted: Fri Jul 09, 2004 4:45 am
by THAWA
more importantly when can we expect a perfection motorsports 2.6l kit for the ej22t?
Posted: Fri Jul 09, 2004 6:35 am
by azn2nr
are you going to be doing anything for the H6 3.0