Page 1 of 1
WRX Underdrive Crank Pulley
Posted: Thu Sep 16, 2004 9:25 pm
by kc-sti
It's time for me to get new belt for my 91 Turbo. So, I am thinking about getting a underdrive pulley. Will the WRX underdrive pulley fit my EJ22T? You can find pulley for WRX everywhere, and good price too.
Thanks for all your help
Posted: Thu Sep 16, 2004 11:45 pm
by Legacy777
I've got an unorthodox I was running.
If you're interested in it, I'll let it go for $150
Posted: Fri Sep 17, 2004 5:03 am
by douglas vincent
These ebay cheap pullies are good bang for the buck. I purchased one and had no problems. Sorry I can't remember the vendor I purchased from, but it was a new item, about $64 shipped.
However, and I don't know if it would have really been a problem, but it seemed that the 5050 tooth grooves for the belt were not cut deep enough so I chucked up the pulley in the lathe and touched mine up. I suspect some are better than others but I would really buy any of them from a vendor with a good rating.
I ended up using mine to make a custom 7.5" crank pulley for the supercharger project.
http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=38634
http://cgi.ebay.com/ebaymotors/ws/eBayI ... egory=6763