Page 1 of 1
Will '02 WRX lateral links fit?
Posted: Sat Jan 15, 2005 7:55 am
by 93Leg-c
Will 'o2 WRX lateral links fit a '93 Legacy na?
Posted: Sat Jan 15, 2005 8:31 am
by BAC5.2
Yea, the rear links should work from GD to GC. I think they all have the same part numbers.
Posted: Sun Jan 16, 2005 5:40 pm
by 93Leg-c
OK, thanks!

I wanted to be sure since I read in another thread that up to an '01 Impreza would fit but '02 WRX was not mentioned.
Posted: Mon Jan 17, 2005 6:41 am
by BAC5.2
Hmm, well, wait a minute, let me clarify.
The rear links for a GD WAGON will work, not a sedan.
I have been thinking about picking up the STi Pink rear lateral links, but I haven't fully decided.
Posted: Mon Jan 17, 2005 6:51 am
by 93Leg-c
Thanks for the clarification, BAC. I would've ended up with some links that I couldn't use.

Posted: Mon Jan 17, 2005 6:53 am
by Yukonart
BAC5.2 wrote:I have been thinking about picking up the STi Pink rear lateral links, but I haven't fully decided.
Nice upgrade. . . but SOOOO pricey.

Posted: Mon Jan 17, 2005 7:00 am
by THAWA
gd wagon?
Posted: Mon Jan 17, 2005 7:04 am
by Yukonart
THAWA wrote:gd wagon?
Yeah. . . why just the Impreza wagon LL work and not the sedan?
With the exception of rear springs and swaybar, I tought the rear ends were pretty much identical.

Posted: Mon Jan 17, 2005 4:18 pm
by NuwanD
GD WRX sedans have a wider track than the Wagon and all GC's
Posted: Mon Jan 17, 2005 5:24 pm
by evolutionmovement
Yeah, I will have to go to GD links if I ever get the chance to do the 22B flares.
Steve
Posted: Mon Jan 17, 2005 6:49 pm
by BAC5.2
THAWA wrote:gd wagon?
Yea, I never cared to notice, or pay attention to the chassis code for the 02+ Impreza wagon. It got the point across, so it doesn't really matter.
Posted: Mon Jan 17, 2005 11:05 pm
by THAWA
As with all other subaru chassis's it follows the trend of going in alphabetical order. If the first gen is f the second gen is g.
Posted: Tue Jan 18, 2005 1:45 am
by Yukonart
NuwanD wrote:GD WRX sedans have a wider track than the Wagon and all GC's
Ahhh. . . then that would explain why the front fenders of the wagons also don't have the angular bulges of the sedan, too.
Never did put two and two together. Thanks!

Posted: Tue Jan 18, 2005 8:23 am
by THAWA
Actually the reason for the squareness is a design element. As with the lack of the three slits on the vents to the side of the fog lights on the 02-03 wagons. The wheels would very much still fit in the fenders if the sedan's had wagons fenders.