Page 1 of 1
Dyno day for the Red Devil on March 16th
Posted: Fri Mar 11, 2005 11:32 pm
by douglas vincent
So I finally can see what 7 psi of supercharged fury puts down to the wheels.
I am doing this at Matrix Integrated in Portland.
My estimations are about 150 hp and 175-180 torque.
Posted: Sat Mar 12, 2005 1:03 am
by scottzg
cooool.
Lookin forward to seeing those charts!
I see a gambling opportunity. I'm gonna say 144 hp and 182 tq.
Posted: Sat Mar 12, 2005 1:25 am
by J-MoNeY
I would image more like 120 maybe. Good luck though.
Posted: Sat Mar 12, 2005 4:33 am
by douglas vincent
Why so low? A stock SS puts down about 135-140ish. I am running higher (not much) boost starts at 7, stops at 9, NA high compression and modded exhaust and ignition. And since I was catching some stock EVOs up hill (as long as they werent playing with me) I know I have torque.
Posted: Sat Mar 12, 2005 8:58 am
by J-MoNeY
Crap! I forgot you people are at sea level. Us 7000 footers don't have that luxury. You may be close then.
Posted: Wed Mar 16, 2005 5:23 am
by douglas vincent
Last chance to place your bets! Cross your fingers I don't get a CEL the moment I get on the boost while actually on the dyno!
Posted: Wed Mar 16, 2005 5:31 am
by J-MoNeY
Quick! Get some 110.
Posted: Wed Mar 16, 2005 5:59 am
by THAWA
i'm guessing like 150 hp/tq
Posted: Wed Mar 16, 2005 6:53 am
by BAC5.2
Probably in the 140whp, 160lb-ft range.
Posted: Wed Mar 16, 2005 8:43 pm
by Brat4by4
130 hp 150 tq