Page 1 of 1
Wiring JDM Foglight switch question...........
Posted: Sun Feb 05, 2006 5:42 am
by stipro
First off I did a search and didnt really find what I needed. As far as the question, the wiring diagram shows the (US) switch having 5 pins, and the (Europe) switch having 6 pins.
note:expand this pic 2X
What is the sixth pin for?, and are the 1-5 pins the same on both switches?
Any help would be great.
Posted: Sun Feb 05, 2006 11:32 pm
by dscoobydoo
Ok, you have dash light in and out, power to fogs in and out and switch light ground. The schematic you linked to only has 5 wires coming from the switch.
Are you going to try and wire it into your factory lighting?
I am just tappng off dash lights and accessory power line and running an aftermarket relay.
Posted: Tue Feb 07, 2006 1:23 am
by stipro
Through trial and error, I figured that the sixth pin is an another switched power supply, for what......................... I dont know. Oh well, it will work for what I need it to do, turn my fog lights off and on
Posted: Sun Feb 12, 2006 6:10 pm
by ericS2the6
a brief writeup on how you wired it would be greatly appreciated
Posted: Mon Feb 13, 2006 1:06 am
by stipro
I will get on that tonight
Posted: Mon Sep 07, 2009 1:11 am
by yazmo
bro still want this write up done
Posted: Mon Sep 07, 2009 4:25 am
by dscoobydoo
The sixth pin int he switch is for the fog lights to turn off when the high beams go on. Just like the newer cars. I did not use it .
Better off NOT using it. Complicates things.
Posted: Mon Sep 07, 2009 4:37 am
by yazmo
this is nice is the other # of pin are correct!
Posted: Tue Sep 08, 2009 4:17 am
by dscoobydoo
Re-view my previous post.
Better off just using the five previously stated pins.
