Page 1 of 1
anybody ever remove the seatbelt under armrest
Posted: Mon Mar 20, 2006 8:39 pm
by Bheinen74
well, my driver side seat belt was not retracting and also had problems coiling back in (the one that is under the armrest center secion) so i decided to try to fix it.
anybody here ever taken apart the "to not remove cover"?
DON'T.....
Posted: Mon Mar 20, 2006 9:23 pm
by IronMonkeyL255
I have an intact set if you need it.
The only reason I left mine in was to screw the center console to.
Re: anybody ever remove the seatbelt under armrest
Posted: Mon Mar 20, 2006 9:31 pm
by gt2.5turbo
Bheinen74 wrote:
DON'T.....
ohhohohohohhh story? what happens? ive always been kinda curious to see...
Posted: Mon Mar 20, 2006 9:38 pm
by Bheinen74
well, let me just say, it was a good thing it wasn't work right before i tore into it.
The little gray cover, Do not remove, well, it contains a piece of flat spring steel, about 6 feet long that is wound up very tightly in a spiral snake. It uncoiled, is sharp on the edges, and greasey. I attempted to try and put it back together, 4 times and 1.5 hours later (tried is twice in a clockwise direction, and twice in a counterclockwise direction), still dont work, so, off to the junkyard i will go, in the snow. I would not want to chance the counterclockwise/clockwise of the spring to my life, if i am ever in an accident i want the seatbelt to work.
Posted: Mon Mar 20, 2006 11:32 pm
by SP-Boxer
I have a little problem with getting the seatbelt back eather.
I also removed the cover "do not remove" and turned it twice. I thought that because I tensioned the spring, the seatbelt would go back easier. It didn't
