ej22t with a manual
Posted: Wed Mar 21, 2007 8:58 pm
so im doing an engine swap to get an ej22t out of an automatic 93..i was wondering if i need to change the ecu to run a manual tranny ? its going into my 95 BD
legacycentral bbs
A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans
https://bbs.legacycentral.org/
ej22t with a manual
Page 1 of 1
Posted: Wed Mar 21, 2007 11:16 pm
You can use the same ECU, the only difference between manual and auto is that the autos had a TCU, but the ECU is exactly the same for the EJ22T
Posted: Wed Mar 21, 2007 11:40 pm
You will need to snip the ECU ID wire...that is it
Posted: Thu Mar 22, 2007 5:48 pm
You may need to mess with the positive leads for the cam & crank sensors....depending on what wiring harness you are using.
Posted: Thu Mar 22, 2007 9:51 pm
do i need the ej22t ecu or can i use my ej22?
Posted: Fri Mar 23, 2007 6:57 am
IIRC, one must use an EJ22T ECU since they are different.
Posted: Fri Mar 23, 2007 7:38 am
Correct you are...BSOD2600 wrote:IIRC, one must use an EJ22T ECU since they are different.
Unless your name is Doug Vincent...
