Page 1 of 1
IAC wiring (at valve, not at ECU) - Legacy SS
Posted: Wed Mar 21, 2007 9:57 pm
by Innovative Tuning
It's a 3 wire connector. Based on how the valve works it's probably:
Push+
Pull+
Ground-
Anyone know which wire is which at the unit itself (not at the ECU)?
Posted: Thu Mar 22, 2007 5:46 pm
by Legacy777
This is for the 90-91, but should be the same for the turbo
http://www.main.experiencetherave.com:8 ... C_diag.jpg
Posted: Thu Mar 22, 2007 11:38 pm
by Innovative Tuning
Ah it's switched + all the time and then push and pull complete to ground. That has the pinout too. Thank you so much. That saves me some troubleshooting. Once I wire that up I can start running antilag. I have the switch wired up and I'm itching to use it.
Posted: Fri Mar 23, 2007 5:34 pm
by Legacy777
welcome
