legacycentral bbs

I need the following parts for an EJ22T, if anyone has them...

- Driver's side motor mount

- Tube that connects the air box to the intake side of the turbo

- Intake elbow off the turbo (where the above tube attaches, is held on to the turbo itself by two bolts) I don't expect anyone to part out a working turbo, but I'm hoping someone either knows where one is, or has a dead one that they could take this off of.

- Turbo engine cover (Not NEEDED but would be nice.. Can just be the badge if you know where there is a broken cover, as I have a non-turbo cover)


- Grille (It's a 91, so I don't know if it's supposed to have a special grille, or if it just has a regular grille)


I also need a downpipe.. I have the flanges, but the junkyard cut the cat out of it and I can't afford an aftermarket pipe at the moment...

I can set you up with that stuff, PM coming.

I have everything but the grill, let me know if blackbart can't hook ya up.

I've got a motor mount for you up in Salem

Looks like Deride and Nick have some parts to get rid of, I can just sell you the parts they don't have.

Not trying to crap on your deal here Frank...just figured since I was local I could give him the motor mount

Not to worry, Nick.
it's just that sometimes I think that I jump on a post too fast without giving other guys a chance to unload their pile-o-parts.
I saw this early this morning before I went out and automatically sent him a PM. I should have waited until I got home.
I keep going through phases; moving as fast as I can so they get the parts fast, then I go through the guilt of being a "selling hog" and back off for awhile. It it hard to see yourself through the eyes of others so I just stay confused.

is this the " - Tube that connects the air box to the intake side of the turbo " that you are looking for?



and here's my engine cover, it has a crack in it

That looks like part of it, I might be able to make something work with that + the non-turbo one that I have, not sure though. The picture I have shows more to it than that...

Yea, I'll look for the part that bolts to the turbo tomorrow. Need some sleep.

You need the 90 that is cast and bolts to the turbo? I think I have one.

Hondasucks wrote:
- Turbo engine cover (Not NEEDED but would be nice.. Can just be the badge if you know where there is a broken cover, as I have a non-turbo cover)

I have a cover if anyone wants it.

Let me know if you want any of that stuff, no luck on finding the 90 that bolts to the turbo yet.

I have what ever you can't find, including the cast elbow

hey Blackbart did you get my PM about the parts?

I have a complete 91, but everyone already knows it.

I have most of that stuff, pm what your still looking for...

So far I've gotten a motor mount, and I should have the turbo elbow piece on the way.. and I toomuch, you have a PM

I got the cam/crank sensors wired and turned it over, with the MAF disconnected, it runs but it only runs for ~5-10 seconds and then shuts off, but it at least turns over and fires lol.. I tried it with the non-turbo intake tube on it, and just bypassed the turbo, and it still wouldn't stay running even with the MAF connected, but I couldn't hook the IAC hose up to the tube since it's hose wasn't long enough, which is what I'm assuming is wrong with it... Oh well, hopefully before too long I'll get the rest of the parts and it'll run... Then it's on to the next car lol

*bump*

ppl need to check their PMs....

*bump*

Anyone? I really need to get this car going...

http://bbs.legacycentral.org/viewtopic.php?t=33835

Here's a new member who may have parts you need.