legacycentral bbs

Buyer pays shipping, please add 3% for PayPal fees. I will only ship to VERIFIED paypal users with VERIFIED addresses within the lower 48 states. All items are available for pickup in the Sacramento area.

Any questions? Please PM or post! And as always, please click for larger pics.

-Josh

Items NOW pictured:
Front and Rear Strut Tower Bars for BC/BF Legacy - I tried to test-fit the front bar, but it wouldn't fit past my silly DMS camber plates. Otherwise, it looks like it'd fit perfectly. I havn't test fit the rear, but I can only assume that it'll work. Both bars are blue in color and have adjustable pre-load, origin unknown. Pictures available for interested parties. Sold!

EDIT: For everyone that PM'ed/posted for strut bar pics, here they are. The bars are steel with no numbers stamped into them. The writing on the bars is from the auto dismantlers in Japan. The shorter bar is the front one.

Click for larger pics.



Items Pictured:
Downpipe (DP) of Unknown Origin with Extra O2 Bungs - Not sure where it came from, but it was modified for a Turbo Legacy, for a total of 3 bungs. $75 + Shipping


2002 WRX Front Calipers with Brackets - These are in great condition, super low miles. They've been in storage since 2004. - $100 + Shipping


Carbotech Bobcat #721 Front Brake Pads - 1997-2001 2.5RS / 2002-2003.5 WRX Fitment, New in Box - $80 + Shipping


Subaru OEM Front Brake Pads - 1997-2001 2.5RS / 2002-2003.5 WRX Fitment, New in Box - $50 + Shipping

PM sent

Think that downpipe will bolt to the stock exhaust? Im local and interested.

-Brian

Can I see a pic of the pads?

I think I have the early 02 WRX brakes, but I'm not sure. I'd like to compare your pads to mine to see if they'll fit.

TheSubaruJunkie wrote:Think that downpipe will bolt to the stock exhaust? Im local and interested.

-Brian

I can't offer you any guarantees. Historically, WRX downpipes have required exhaust modifications to fit. I can point you towards a great exhaust shop if necessary though. Let me know-

Josh

To everyone requesting pictures/info:

I'll go out to the garage and get pics today. Will reply via PM/thread as necessary, thanks for the interest!

kidatari wrote:

TheSubaruJunkie wrote:Think that downpipe will bolt to the stock exhaust? Im local and interested.

-Brian

I can't offer you any guarantees. Historically, WRX downpipes have required exhaust modifications to fit. I can point you towards a great exhaust shop if necessary though. Let me know-

Josh

i thought they were exactly the same size?
not to ruin anything here, and if it did fit on a legacy before, then it should again. subaru hasn't changed much in terms of exhaust

SubaruNation wrote:

kidatari wrote:

TheSubaruJunkie wrote:Think that downpipe will bolt to the stock exhaust? Im local and interested.

-Brian

I can't offer you any guarantees. Historically, WRX downpipes have required exhaust modifications to fit. I can point you towards a great exhaust shop if necessary though. Let me know-

Josh

i thought they were exactly the same size?
not to ruin anything here, and if it did fit on a legacy before, then it should again. subaru hasn't changed much in terms of exhaust

As I said earlier, the DP has a properly placed O2 sensor bung for a Turbo legacy. As its origin is unknown, and I have not made an attempt to fit it on my car, I certianly can't guarantee that it will fit a turbo legacy without other modification. Hope that clears it up.

Completly understood from the 1st reply i got.

Would certainly love to try it. But dont think an exhaust can be afforded at this time.

PM sent on strut bars.

Isn't that the same DP I wanted to buy from you a while ago?

beatersubi wrote:Isn't that the same DP I wanted to buy from you a while ago?

ooooooooooooooooooooohh!
oh snap!

beatersubi wrote:Isn't that the same DP I wanted to buy from you a while ago?

Yes, indeed it was. It was supposed to have been sold to a friend, but he kept promising he'd pick it up but never did, so it's back up for sale.

For everyone that PM'ed/posted for strut bar pics, here they are. The bars are steel with no numbers stamped into them. The writing on the bars is from the auto dismantlers in Japan. The shorter bar is the front one. Price is $80 for both bars.

Click for larger pics.



And for n2x4, brake pad pics:

Hmmm if the down pipe isn't sold by Jan 4 let me know....

Is it still for sale?

beatersubi wrote:Is it still for sale?

It's still for sale, yep

Did you get my pm on the strut bars?

Jeff

I would like to purchase the strut bars if you would reply to my pm that I sent you.

Bump, everything is still for sale. The Strut Bars are BOXED and ready to go!

Will the front strut bar clear an 06 TMIC on the BC?

pm'ed you on strut bars.

SubiePrice88 wrote:pm'ed you on strut bars.

Reply sent!

are the towers still for sale?

2 things. The WRX downpipe is about 4 inches longer than your stock legacy downpipe, it matches up perfectly to the turbo, does not have one of the mounting brackets that goes to the engine (not a big deal at all), I didn't see a mounting tab on the back of the DP like there was on mine. It looks like that DP has an o2 sensor bung and an exhaust gas temp bung... pretty sweet.

Also, how would that rear strut bar fit around the rear seat?

whoever is inquiring about the strut bars, ITS TOO LATE

sold to ME.

and he even shipped them the same day, wow now thats service.

BUMP