Page 1 of 2
1993 Legacy part out
Posted: Thu Jul 10, 2008 4:35 am
by jamal
So you may have heard I lost a rod bearing or three in my Legacy so it's getting parted out. I'm keeping some of the good stuff though.
The body is not in good shape and I wouldn't recommend purchasing any of the body panels. Especially the hood and trunk, unless you're having them painted. Most of the interior and trim is in good shape, the passenger headlight and turn signal are damaged, the grill is cracked, and the front left wheel bearing is questionable
Things that I don't have for sale
rear swaybar
struts/springs
front bumper
wheels
original brakes
things that are in very good condition:
front pass wheel bearing/hub/upright
ball joints
tie rods
steering rack
automatic OEM radiator
knock sensor
JECS maf
things that are in bad condition:
short block
transmission
exterior
pass. headlight and turn signal
grille
additional things I have/will have for sale
2.5 gt 20mm front swaybar (fits all non-turbos)
2.5 gt brakes
2.5 gt black and grey front seats
2.5 gt suspension (struts are not blown)
04 sti springs and tops/perches
Wiring harness adapter to use modern Subaru radios. Soldered and heat shrunk using a David Carter harness so the dimmer and power antenna will work.
I'll add more things when I think of them. The car is located in Fountain Valley, CA 92708
my paypal address is peterleclaire (at) gmail (dot) com
Posted: Thu Jul 10, 2008 5:01 am
by Fkyx
What color is the interior?
Posted: Thu Jul 10, 2008 5:03 am
by jamal
blue car, blue interior.
Posted: Thu Jul 10, 2008 5:09 am
by Fkyx
What do you want for the MAF shipped to 97601 (Oregon)?
Posted: Thu Jul 10, 2008 5:15 am
by jamal
$40. I got it used a month ago for that much.
oooh these seem to be a popular item in the parts shed. hows about $30 shipped
Posted: Thu Jul 10, 2008 6:03 am
by skid542
So soon
.
Are you going to be keeping the rear camber bolts you used to adjust the STi struts?
Posted: Thu Jul 10, 2008 6:10 am
by jamal
skid542 wrote:So soon
.
Are you going to be keeping the rear camber bolts you used to adjust the STi struts?
not sure. I'll have to see what numbers I get on the new car. I have a feeling I'll need them though.
Posted: Thu Jul 10, 2008 7:01 am
by 93Subadan
How much for the driver's side turn signal shipped to 93505? I lost mine to a tumbleweed so I would need the turn signal, the cap that holds the bulb including the wiring going back to the white connector.
PM me, thanks!!
Posted: Sat Jul 12, 2008 8:57 am
by 93Leg-c
What are you asking for the 20mm front sway bar shipped?
Posted: Sat Jul 12, 2008 3:57 pm
by ericem
Jamal are the ball joints OEM and almost new? New OEM ones are $30 each.
Posted: Sat Jul 12, 2008 4:04 pm
by Dusty B
How much would you want for that knock sensor and wiring harness adapter shipped to 06234?
Posted: Sat Jul 12, 2008 8:49 pm
by bvh56
do you have the steel lines off the power steering rack available.
Posted: Sat Jul 12, 2008 9:38 pm
by flystiguy
Was it a 5-speed tranny? If so do you what kind? and do you have the clutch pedal set?
Posted: Sat Jul 12, 2008 11:10 pm
by jamal
ericem wrote:Jamal are the ball joints OEM and almost new? New OEM ones are $30 each.
yeah I put them in about a year and a half ago and they were new OEM parts. They should still be in great condition, I'll take them out tomorrow or monday when I pull my front suspension off and let you know.
flystiguy wrote:Was it a 5-speed tranny? If so do you what kind? and do you have the clutch pedal set?
no sorry it's an automatic.
Posted: Sat Jul 12, 2008 11:40 pm
by ericem
jamal wrote:ericem wrote:Jamal are the ball joints OEM and almost new? New OEM ones are $30 each.
yeah I put them in about a year and a half ago and they were new OEM parts. They should still be in great condition, I'll take them out tomorrow or monday when I pull my front suspension off and let you know.
flystiguy wrote:Was it a 5-speed tranny? If so do you what kind? and do you have the clutch pedal set?
no sorry it's an automatic.
You know what I changed my mind. I prefer to go brand new, unless your willing to give a good price and make sure the seals are good!! I was also wondering if you ahve the nippon abs unit and if so i need the two relays from it.
Posted: Mon Jul 14, 2008 9:12 pm
by ca18_sean
you have a driver side rear axle in good shape? also how much for the radio harness? price shipped to Oldsmar, FL 34677.
thanks,
-Sean
Posted: Tue Jul 15, 2008 12:51 am
by jamal
I'll take the axle out in the next few days to see if it's good. I think the harness might already be sold.
Posted: Tue Jul 15, 2008 6:34 am
by SubaruNation
ya something is way wrong w/ my suspension.
i might need some parts from your SS when you come back to MT if so.
i'll let you know when i figure out what the problem is..
Posted: Tue Jul 15, 2008 4:33 pm
by Legacy777
Jamal,
I need like like 4 or 5 bolts from the front bumper that hold on the bumper skin. Would you have these?
Posted: Tue Jul 15, 2008 8:27 pm
by jamal
I do, but someone already has dibs on the bumper, and he may need them.
Posted: Wed Jul 16, 2008 12:45 am
by Legacy777
ok
Posted: Thu Jul 17, 2008 12:16 am
by 93Subadan
Got the corner light in the mail today, thanks for the fast shipping!
Posted: Wed Sep 10, 2008 7:45 pm
by ca18_sean
did you ever check on that axle? and did the radio harness sell?
Posted: Wed Sep 10, 2008 9:46 pm
by Bdub
Do you still have the 04 sti springs? And do you have all 4 perches?
Also the front wheel bearing and hub?
Posted: Thu Sep 11, 2008 5:35 pm
by 92wagon
what years does the 2.5 gt swaybar fit?