legacycentral bbs

hi all, anyone have any tips for the reinstallation of my engine?
anything specific i should watch out for? i plan on doing this
tonight. Johnny? Justin? Dave? Anyone?

Jason



-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/0/_/_/_/978040658/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Just watch all the fiddly hard-to-get-at extraneous bits before you start
tightening up all the major bits, such as...

- bolting up the bottom bell housing plate before you finally seat the
engine on it's mounts
- putting all the turbo shield bolts in, and not be tempted to leave the
hard-to-get-at one out all together
- use copper based anti-sieze on your turbo flange bolts, bell housing
dowels, etc... just in case you need to revisit

Have fun!

John Gillon
www.clubsub.org.nz


----- Original Message -----
From: Jason Grahn <jgrahn555@hotmail.com>
To: <BC-BFLegacyWorks@egroups.com>
Sent: Friday, December 29, 2000 10:57 AM
Subject: [BC-BFLegacyWorks] engine install!


> hi all, anyone have any tips for the reinstallation of my engine?
> anything specific i should watch out for? i plan on doing this
> tonight. Johnny? Justin? Dave? Anyone?
>
> Jason
>
>
>
>
> To unsubscribe from this group, send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>


-------------------------- eGroups Sponsor -------------------------~-~>
Big News - eGroups is becoming Yahoo! Groups
Click here for more details:
http://click.egroups.com/1/10801/0/_/_/_/978054904/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Can't really think of anything other than the obvious. Make sure all
electrical grounds are securely fastened, particularly those on the
engine.

Justin



--- In BC-BFLegacyWorks@egroups.com, "Jason Grahn" <jgrahn555@h...>
wrote:
> hi all, anyone have any tips for the reinstallation of my engine?
> anything specific i should watch out for? i plan on doing this
> tonight. Johnny? Justin? Dave? Anyone?
>
> Jason


-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/0/_/_/_/978062146/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com