legacycentral bbs

Alright, I've purchased a 20mm WRX wagon front sway bar for my 91 turbo legacy and now I'd like to buy a 20mm rear sway bar and I found out that whiteline sells it.

Part number BSR17X

Question is, where can I buy one at? Not from whiteline either. They want $152 for shipping which comes out to $381

That's too much. I searched google for the part number and found an old post on ultimate subaru message board from a dealer in the US that was selling them for $145.

OK well I guess I didn't think to check their vendors and found out Global Performance parts carries whiteline products and I checked their website and it says it's in stock for $193 plus like $17 for shipping. Which is way better. That's the the 20mm adjustable swaybar.

Do I need an adjustable sway bar? Probably not. Would I really want to adjust it down to 18mm again?

Now I'm really confused. I searched for BSR17XZ and it comes up with a 20mm rear sway bar for $245 but if I search for BSR19XZ it comes up with the same thing for $193.

Something is not right here.

The chart here is helpful... But the vendor isn't helpful since they are a Nissan shop and don't know the in's and out's of our cars...

http://www.pdm-racing.com/products/subaru_corner.html

Or call Dale here if you want to speak with someone knowledgeable...Nice guy.

http://www.boxer4racing.com/

kimokalihi wrote:Now I'm really confused. I searched for BSR17XZ and it comes up with a 20mm rear sway bar for $245 but if I search for BSR19XZ it comes up with the same thing for $193.

Something is not right here.

It's the same bar, but BSR17XZ comes with special endlinks that work with the 91 lateral link. The 92-94 have a different lateral link and you can re-use the stock endlinks, so the BSR19XZ does not include anything but the bar and bushings.

Alright, thanks. So I need the BSR17XZ bar then for my 91?

Does it come with new bushings for everything or do I have to reuse 170K mile bushings?

Whiteline kits usually come with bushings, as the bar is usually a different diameter than the stock bar. That's the point, right? Someone had a set of those 91 style drop links for sale, email me...

Get the BSR19XXZ.

It's 22mm but you can just leave it at full soft. I can call a few places tomorrow to find out our price on it if you'd like.

It does come with urethane bushings. It may not be a bad idea to pick up some 04-07 Impreza rear mounts, which are stronger, along with W0406-22 bushings for them.

It's exactly what I'm doing. When I build Robi's car I'm going to ask for some of my payment in whiteline parts.

Thanks that would be nice.

Where do I get the bushings for the impreza mounts?

My WRX wagon front sway bar is out for delivery right now! Should be here when I wake up.

I believe thats the whiteline part number for the bushings...

W0406-22