Page 1 of 1
Polyurethane bushing kit for 92 BC models?
Posted: Fri Dec 04, 2009 4:02 pm
by pirategmunger
I'm looking for a stiff Polyurethane bushing set for my 92 Legacy BC model. Can anyone give me some info?
Posted: Fri Dec 04, 2009 9:12 pm
by IronMonkeyL255
The kit listed for GC Imprezas works.
I ordered the Superpro kit for mine and installed all the bushings myself (except those damn front A-arm bushings....) They have 2 different kits, but the only difference is which steering rack bushings it has included (25 or 30 mm wide brackets)
Give Dale at boxer4racing a call and tell him what you're looking for. To make sure, have him look up what kit C.J. with the legacy (that's probably how he knows me) got a few years back. I special ordered it and it took a few weeks to arrive.
Posted: Fri Dec 04, 2009 9:19 pm
by IronMonkeyL255
Oh, and did you mean engine mounts and whatnot or suspension bushings? I was talking Suspension bushings without remembering i was in the engine forum. Anyways, here is the link to when I got the kit.
Clicky clicky!
If you are meaning engine mounts, go with the STI group N mounts. They aren't polyurethane, but instead a high durometer (very stiff) rubber. I also got the tranny mount bushings from TurninConcepts, which are poly and very stiff. About the only thing I haven't replaced at this point is the dogbone, and that is only because everyone wants WAY too damn much for them, IMHO.
Posted: Sat Dec 05, 2009 1:14 am
by kimokalihi
Yeah you just gotta check NASIOC. I just bought the STI group N pitch mount new over there for $40 shipped.
Posted: Sat Dec 05, 2009 8:23 am
by Japanac
IronMonkeyL255 wrote:Oh, and did you mean engine mounts and whatnot or suspension bushings? I was talking Suspension bushings without remembering i was in the engine forum. Anyways, here is the link to when I got the kit.
Clicky clicky!
If you are meaning engine mounts, go with the STI group N mounts. They aren't polyurethane, but instead a high durometer (very stiff) rubber. I also got the tranny mount bushings from TurninConcepts, which are poly and very stiff. About the only thing I haven't replaced at this point is the dogbone, and that is only because everyone wants WAY too damn much for them, IMHO.
So all engine mounts from impreza`s fit on legacy with EJ20 engine?
Im asking because im quite desperate, lol, i have a dead engine mount (front left) and my only option (except from ebay or other web orders) is subaru dealer and the price for that engine mount is 600$
Posted: Sat Dec 05, 2009 8:27 am
by mike-tracy
EJ motor mounts are interchangeable. Even though STI ones have a different shape, they still fit in your crossmember's motor-mount holes, and bolt up to the engine.
Posted: Sat Dec 05, 2009 1:47 pm
by Japanac
Tnx! So that means anything i find for any impreza, fits? Any advice on aftermarket one`s? With worldwide delivery
Posted: Mon Dec 07, 2009 3:15 am
by IronMonkeyL255
Exactly.
Subarus are like legos........