legacycentral bbs

i am in the same boat please help.
----- Original Message -----
From: <legacy_productions@yahoo.com>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Tuesday, February 27, 2001 7:10 PM
Subject: [BC-BFLegacyWorks] STi/SPT Shift kit


> Ok I just want to make sure that if I order the STi/SPT short shift
> kit from this link
> (https://ssl.autocenter.net/webparts/aca ... ue_Drive_T
> rain_504.html) it will fit my 92 Legacy Turbo. And if it does, does
> anybody know what it will take to install it? Any pointers or things
> not to do? Any help would be appreciated.
>
>
> Jay Erlenbach
> '92 Legacy Turbo Sedan
>
>
>
> To unsubscribe from this group, send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>


To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Ok I just want to make sure that if I order the STi/SPT short shift
kit from this link
(https://ssl.autocenter.net/webparts/aca ... ue_Drive_T
rain_504.html) it will fit my 92 Legacy Turbo. And if it does, does
anybody know what it will take to install it? Any pointers or things
not to do? Any help would be appreciated.


Jay Erlenbach
'92 Legacy Turbo Sedan



To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Jay-

first off, no guarantees.

I know it fit on my '90 NT with no problems. I know that it fit on my
buddies '93 impreza with a legacy engine with no problems. I know that it
fits on a 99 impreza with no problems.

And from what i hear from a couple technitions that i know, it should
(emphasis on should) fit on your legacy with no problem.

I set my stock one out on my floor next to the SPT one before i installed it
to check to see if all the mounting points were the same. You might want to
do this too.

Its going to take a phillips head screwdriver, a floor jack (the larger the
better), two jackstands, 12mm socket, 12mm box-end wrench, a hammer, and a
punch-pin thingie or the right sized allen wrench. Oh, and 3 hours if your
doing it by yourself, at night, for the first time, while it's cold, with
manual tools.

If your stock shift assembly has the spring in it (you'll find it if you
have it) remember to put that back in cuz it makes the shifter feel more
comfortable.

Good luck!

Jason

>Ok I just want to make sure that if I order the STi/SPT short shift
>kit from this link
>(https://ssl.autocenter.net/webparts/aca ... ue_Drive_T
>rain_504.html) it will fit my 92 Legacy Turbo. And if it does, does
>anybody know what it will take to install it? Any pointers or things
>not to do? Any help would be appreciated.
>
>Jay Erlenbach
>'92 Legacy Turbo Sedan

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Ok thanks for the help but one more question... If it
does fit will I have to drop the tranny to replace it
or not? Did the kit come with any type of detailed
instructions? Or is this something that you have to
know it already to do it? Also does anyone have
documentation on part numbers for the factory linkage
for both the 90 NA and the 92 Turbo Legacys, figured I
would check here first before making a fool out of my
self at my local Subaru dealer... they don't like me
as it is.

thanks again for your help.

Jay
'92 Legacy Turbo

--- jason grahn <jgrahn555@hotmail.com> wrote:
> Jay-
>
> first off, no guarantees.
>
> I know it fit on my '90 NT with no problems. I know
> that it fit on my
> buddies '93 impreza with a legacy engine with no
> problems. I know that it
> fits on a 99 impreza with no problems.
>
> And from what i hear from a couple technitions that
> i know, it should
> (emphasis on should) fit on your legacy with no
> problem.
>
> I set my stock one out on my floor next to the SPT
> one before i installed it
> to check to see if all the mounting points were the
> same. You might want to
> do this too.
>
> Its going to take a phillips head screwdriver, a
> floor jack (the larger the
> better), two jackstands, 12mm socket, 12mm box-end
> wrench, a hammer, and a
> punch-pin thingie or the right sized allen wrench.
> Oh, and 3 hours if your
> doing it by yourself, at night, for the first time,
> while it's cold, with
> manual tools.
>
> If your stock shift assembly has the spring in it
> (you'll find it if you
> have it) remember to put that back in cuz it makes
> the shifter feel more
> comfortable.
>
> Good luck!
>
> Jason
>
> >Ok I just want to make sure that if I order the
> STi/SPT short shift
> >kit from this link
>
>(https://ssl.autocenter.net/webparts/aca ... ue_Drive_T
> >rain_504.html) it will fit my 92 Legacy Turbo. And
> if it does, does
> >anybody know what it will take to install it? Any
> pointers or things
> >not to do? Any help would be appreciated.
> >
> >Jay Erlenbach
> >'92 Legacy Turbo Sedan
>
>
_________________________________________________________________
> Get your FREE download of MSN Explorer at
> http://explorer.msn.com
>
>


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

No you do not have to drop the tranny.

Mine did not come with detailed instructions. On a scale of 1-10 (10 being
the most difficult) this would be about a 5, but thats because i did it in
difficult circumstances. I did not know how to do it before hand.

I don't have part numbers, i just have spares, sorry. =(

Jason

>Ok thanks for the help but one more question... If it
>does fit will I have to drop the tranny to replace it
>or not? Did the kit come with any type of detailed
>instructions? Or is this something that you have to
>know it already to do it? Also does anyone have
>documentation on part numbers for the factory linkage
>for both the 90 NA and the 92 Turbo Legacys, figured I
>would check here first before making a fool out of my
>self at my local Subaru dealer... they don't like me
>as it is.
>
>thanks again for your help.
>
>Jay
>'92 Legacy Turbo
>
>--- jason grahn <jgrahn555@hotmail.com> wrote:
> > Jay-
> >
> > first off, no guarantees.
> >
> > I know it fit on my '90 NT with no problems. I know
> > that it fit on my
> > buddies '93 impreza with a legacy engine with no
> > problems. I know that it
> > fits on a 99 impreza with no problems.
> >
> > And from what i hear from a couple technitions that
> > i know, it should
> > (emphasis on should) fit on your legacy with no
> > problem.
> >
> > I set my stock one out on my floor next to the SPT
> > one before i installed it
> > to check to see if all the mounting points were the
> > same. You might want to
> > do this too.
> >
> > Its going to take a phillips head screwdriver, a
> > floor jack (the larger the
> > better), two jackstands, 12mm socket, 12mm box-end
> > wrench, a hammer, and a
> > punch-pin thingie or the right sized allen wrench.
> > Oh, and 3 hours if your
> > doing it by yourself, at night, for the first time,
> > while it's cold, with
> > manual tools.
> >
> > If your stock shift assembly has the spring in it
> > (you'll find it if you
> > have it) remember to put that back in cuz it makes
> > the shifter feel more
> > comfortable.
> >
> > Good luck!
> >
> > Jason
> >
> > >Ok I just want to make sure that if I order the
> > STi/SPT short shift
> > >kit from this link
> >
> >(https://ssl.autocenter.net/webparts/aca ... ue_Drive_T
> > >rain_504.html) it will fit my 92 Legacy Turbo. And
> > if it does, does
> > >anybody know what it will take to install it? Any
> > pointers or things
> > >not to do? Any help would be appreciated.
> > >
> > >Jay Erlenbach
> > >'92 Legacy Turbo Sedan
> >
> >
>_________________________________________________________________
> > Get your FREE download of MSN Explorer at
> > http://explorer.msn.com
> >
> >
>
>
>__________________________________________________
>Do You Yahoo!?
>Get email at your own domain with Yahoo! Mail.
>http://personal.mail.yahoo.com/
>
>To unsubscribe from this group, send an email to:
>BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com