legacycentral bbs

so i have a 91 ss turbo
aaaand i was wondering,
can i take out the turn signals down below the headlights, and move them up to where my day time runners are?, all the legacies after mine already have the turn signals up there in the corner by the headlights,
but mine are where fog lights go lol.
id like to throw some fogs down there and keep the day time runners (myb a led cluster ) and turn signals up where my headlights are,
is this possible, i took everything apart this weekend and it looks plenty do able , just wanted to kno if theres any body out there whose done this, had any issues or anything.


aaand if i can do ^^^that^^^ what fogs go great in that area, its a lil rectangly , was wondering if 98 legacy gt ( yellow!?!?!) fogs would fit there, if not o well. i like that yellow look to fogs tho.
rambling , sorry.

you should search a little more nad you would have found pleanty of answers but since im here i will give you all that you wish to know.

1st: yes you can, i have done this aswell as many others. I dont care about the daytime and its extra insurance since we dont have the side marker on the fender like the post faces have.
2nd: yes this should be possible as well, when you use your turn signal basicly it will just turn off instead of on.

go to home depot for splicing equiptment as they have more varieties than autozone does. you can use the T clamps or maybe get fancy and solder everything up if you are OCD.

again if you search you will see that some dremel out a area and place a small Pilot(company) fog light in there and call it a day seeing as for some reason they left room for something else it looks like. also sme use the 02-03 WRX foglights i believe as well, his car shows up on the top rotating pictures cant remember who's though.

dont be afraid to try something new either, i just installed WRX 04 fog lights in my N/A which as far as im aware hasnt been done before.

nice, i thank you. headed to my garage right now


well after work. but you get the drift.

I actually dremeled out the housing on the corner lights to fit a dual filament bulb in the stock housing. That way i didn't sacrifice anything, just moved the turn signals up.

IronMonkeyL255 wrote:I actually dremeled out the housing on the corner lights to fit a dual filament bulb in the stock housing. That way i didn't sacrifice anything, just moved the turn signals up.

^^^those were the words i was wanting to hear , i thank you good sir.

sorry thought i mentioned that already