Just checked the throttle body and it is now 64mm in size, I will
flow it and give you an indication what difference it has made from
standard.
--- In BC-BFLegacyWorks@y..., daniel.wilson@d... wrote:
> Sorry Rod, where do you live? My car is N/A at the moment, yes it
> made a huge difference. My throttle body is now 62mm or 64mm (can't
> remember which) the biggest increase is in the middle almost
totally
> flat from the opening to the exit. You can't really tell by a
photo.
> You are limited in size by one of the water galleries, my throttle
> body is 3/4 mm from the gallery.
>
> I am running Stock injectors, just increased the fuel pressure. How
> ever I have a WRX inlet manifold and injectors about to go on the
> car, I have had them on once but didn't have enough hose to
complete
> so had to take them off again. The new injectors are 440cc and I am
> going to need a new fuel pump. A Mitsubishi GTO twin turbo fule
pump
> will fit in the tank and replace the existing, hard to find though.
> This is going to cost me about $600.00 for a bosch out of tank fuel
> pump.
>
> Alocohol and water injection would made a huge difference to a N/A
> engine also, you would have to set that up to work off a switch on
> the throttle.
>
> The motor has had 15,000 dollars spent on it so far that was a full
> re-build and balanced and blue printed bottom end. It will keep up
> with most RS or WRX's.
>
> I made up some stainless steel extractors and 3 inch mandrel bent
> exhaust, had to put 3 mufflers to get enough back pressure two
18inch
> hotdog Cobi's and a stainless borla muffler at the end, when the
cat
> gets the turbo both cobi's go.
>
> I have a td05 turbo being built for it at the moment.
>
> Daniel
>
> --- In BC-BFLegacyWorks@y..., "Rod Grosvenor" <roderic@c...> wrote:
> > Daniel-Would boring out the 60mm throttle body help an NA motor
> also? Had`nt ever thought of doing that; any info, pictures, etc.
> would help as I`m planning a cam change, too. Can`t afford to do
> heads now, so this mod, cams & throttle body might help. P. S.-are
> you running the stock injector size? Is yours 380cc? Let me know-
> thanks-the other ROD (AZ.)
> > ----- Original Message -----
> > From: daniel.wilson@d...
> > To: BC-BFLegacyWorks@y...
> > Sent: Thursday, April 26, 2001 8:53 PM
> > Subject: [BC-BFLegacyWorks] Re: Intercooler warning light
> >
> >
> > So what do you want to do?
> >
> > A good start would be to bore out the throttle body, and get a
> new
> > butterfly. Made a huge difference to my car.
> >
> > Give me some idea and I can tell you what to do and how to do
it.
> >
> > Daniel
> >
> > --- In BC-BFLegacyWorks@y..., quin@t... wrote:
> > > I'm in good old Wellington! you?
> > >
> > > --- In BC-BFLegacyWorks@y..., daniel.wilson@d... wrote:
> > > > Where abouts in New Zealand?
> > > >
> > > > --- In BC-BFLegacyWorks@y..., quin@t... wrote:
> > > > > Hey,
> > > > >
> > > > > thanks for the reply, I live in NZ>
> > > > >
> > > > > Cheers
> > > > > q
> > > > >
> > > > > --- In BC-BFLegacyWorks@y..., "dfullerton"
> <dfullerton@d...>
> > > wrote:
> > > > > > well it depends wher you live in the uk
scoobynet ,loads
> of
> > > > second
> > > > > hand
> > > > > > parts.
> > > > > > ----- Original Message -----
> > > > > > From: <quin@t...>
> > > > > > To: <BC-BFLegacyWorks@y...>
> > > > > > Sent: Thursday, April 26, 2001 10:50 PM
> > > > > > Subject: [BC-BFLegacyWorks] Intercooler warning light
> > > > > >
> > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I'm now to the group and in act Legacy's just got a
> 1990 RS
> > a
> > > > few
> > > > > > > weeks ago, love it!
> > > > > > >
> > > > > > > Anyway I noticed the electronic wire connection on
top
> of
> > the
> > > > > > > intercooler was unplugged so plugged it in and now
the
> > warning
> > > > > light
> > > > > > > is displayed on the dash. The intercooler has plenty
of
> > fluid
> > > > in
> > > > > it,
> > > > > > > it is actually a dark green colour (antifreeze I
> assume,
> > but
> > > > looks
> > > > > > > like a very rich mix) so what does this light warn
> against?
> > Is
> > > > it
> > > > > > > just water level if so it must be faulty, any
> suggestions?
> > > > > > >
> > > > > > > Also looing to start modifying my baby, its factory
> > standard
> > > > now,
> > > > > > > over the weekend, I took the airbox out and removed
the
> > intake
> > > > > > > silencer box from inside the front guard and just ran
> > stright
> > > > pipe
> > > > > > > through there, will get a performace filter soon,
what
> else
> > > can
> > > > I
> > > > > > > look to do myself? Also any suggestion on anywere to
> source
> > > > cheap
> > > > > > > performance parts?
> > > > > > >
> > > > > > > Thanks for your time.
> > > > > > >
> > > > > > > Quin
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > To unsubscribe from this group, please send an email
to:
> > > > > > >
BC-BFLegacyWorks-unsubscribe@egroups.com
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject to
> > > > >
http://docs.yahoo.com/info/terms/
> > > > > > >
> > > > > > >
> >
> >
> >
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> >
BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
)