Page 1 of 1
Quick Question
Posted: Wed Mar 27, 2013 10:14 pm
by 92ColoradoTurbo
What are the torque settings for the intake manifold bolts to the top of the heads? I looked on the service manual and couldn't find anything, same with searching the forums.
Thanks
Re: Quick Question
Posted: Wed Mar 27, 2013 10:40 pm
by kimokalihi
Beats me but I would guess 12 ft lbs. Just use a short 3/8" ratchet and do it by feel. I only torque internals or wheel lugs.
Re: Quick Question
Posted: Thu Mar 28, 2013 1:14 am
by cj91legss
what do you torque your wheels to Kimo?
+1 on the 3/8 ratchet.
Re: Quick Question
Posted: Thu Mar 28, 2013 2:13 am
by kimokalihi
80 ft lbs. I don't know what the book says but I think its less.
Re: Quick Question
Posted: Thu Mar 28, 2013 5:25 pm
by Legacy777
74 ft-lbs for the wheel lugs.
I'm not sure about the intake manifold bolts.....like the others have said, use a 3/8" ratchet and torque by fell.