FS: 2.5 SOHC Heads, Intake, $300
Posted: Tue Mar 29, 2016 4:40 pm
For a while I was working on going down the road of going to a 2.5 setup in my legacy and had been acquiring parts. Since then, I've started going a different route and I think it's time to start really purging more of my subi stock.
Therefore, I have a set of 2.5 SOHC heads and manifold to get rid of. The heads have been checked out by the local machine shop and they are in good shape. They have not been ground down and I would probably recommend that prior to mating them to a block just out of good practice.
The intake manifold is complete with injectors, wiring, and coil pack.
I'm asking $300 plus shipping for the whole setup.
I also have a set of brand new Grimmspeed phenolic spacers for these heads that I'll let go for another $70.
I'll get pictures posted up in the next few days. Please let me know if you have any questions or there is anything else I can do to help.
Thank you,
Lee
Therefore, I have a set of 2.5 SOHC heads and manifold to get rid of. The heads have been checked out by the local machine shop and they are in good shape. They have not been ground down and I would probably recommend that prior to mating them to a block just out of good practice.
The intake manifold is complete with injectors, wiring, and coil pack.
I'm asking $300 plus shipping for the whole setup.
I also have a set of brand new Grimmspeed phenolic spacers for these heads that I'll let go for another $70.
I'll get pictures posted up in the next few days. Please let me know if you have any questions or there is anything else I can do to help.
Thank you,
Lee