legacycentral bbs

Hi,

i'm a new member to your list from Australia. I have a
Liberty Lx / Legacy L 2.2. I am currently in the slow process of
increasing the power of my 2.2. (I NEVER HAVE ANY MONEY) I have
decided i don't want to turbo yet, but rather am looking towards
other options. I have a full 2 1/4 exhaust incl. hi-flow cat from the
engine pipes back and have done a 4 inch cold air induction from the
front grill straight through to a K&N filter. My next move is a port
and polish. Has anyone out there had one on their sooby, or know
someone who has, and has it made a considerable difference. The guy
has told me it will give me 10 - 15 more KW so i'm guessing it'll be
pretty good. Any suggestions on what else i can do to a non-turbo for
more power please reply.

Thanks George. OZ


To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Underdrive Pulley will give you a tad more power, and a lightened flywheel
will help get the revs up faster.

-Jason


>From: georgerbyrne@yahoo.com
>Reply-To: BC-BFLegacyWorks@yahoogroups.com
>To: BC-BFLegacyWorks@yahoogroups.com
>Subject: [BC-BFLegacyWorks] Liberty Lx 2.2
>Date: Wed, 23 May 2001 129:34 -0000
>
>Hi,
>
>i'm a new member to your list from Australia. I have a
>Liberty Lx / Legacy L 2.2. I am currently in the slow process of
>increasing the power of my 2.2. (I NEVER HAVE ANY MONEY) I have
>decided i don't want to turbo yet, but rather am looking towards
>other options. I have a full 2 1/4 exhaust incl. hi-flow cat from the
>engine pipes back and have done a 4 inch cold air induction from the
>front grill straight through to a K&N filter. My next move is a port
>and polish. Has anyone out there had one on their sooby, or know
>someone who has, and has it made a considerable difference. The guy
>has told me it will give me 10 - 15 more KW so i'm guessing it'll be
>pretty good. Any suggestions on what else i can do to a non-turbo for
>more power please reply.
>
>Thanks George. OZ
>
>
>To unsubscribe from this group, please send an email to:
>BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Sounds like you have done every thing you can do that doesn't cost
the earth.

Bore out your throttle body, this will nicely aid all the work you
spent on the cold air box. Bigger fuel pump and injectors or alcohol
and water injection run from a switch on WOT.

Yes a port and polish would make a difference but I would recomend
the above before you do this, so the engine doesn't lean out too much.

Dan

--- In BC-BFLegacyWorks@y..., georgerbyrne@y... wrote:
> Hi,
>
> i'm a new member to your list from Australia. I have a
> Liberty Lx / Legacy L 2.2. I am currently in the slow process of
> increasing the power of my 2.2. (I NEVER HAVE ANY MONEY) I have
> decided i don't want to turbo yet, but rather am looking towards
> other options. I have a full 2 1/4 exhaust incl. hi-flow cat from
the
> engine pipes back and have done a 4 inch cold air induction from
the
> front grill straight through to a K&N filter. My next move is a
port
> and polish. Has anyone out there had one on their sooby, or know
> someone who has, and has it made a considerable difference. The guy
> has told me it will give me 10 - 15 more KW so i'm guessing it'll
be
> pretty good. Any suggestions on what else i can do to a non-turbo
for
> more power please reply.
>
> Thanks George. OZ


To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

George-I have an NA motor also & have found the following very helpful: Borla headers, upgraded coil from an RS 2.5, Iridium plugs, upgraded wires, DIS-2 ignition. I know 2 of the items are`nt cheap, but they made a HUGE difference-good luck-ROD-(NO. AZ.)

----- Original Message -----
From: georgerbyrne@yahoo.com
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Wednesday, May 23, 2001 59 AM
Subject: [BC-BFLegacyWorks] Liberty Lx 2.2

Hi,

i'm a new member to your list from Australia. I have a
Liberty Lx / Legacy L 2.2. I am currently in the slow process of
increasing the power of my 2.2. (I NEVER HAVE ANY MONEY) I have
decided i don't want to turbo yet, but rather am looking towards
other options. I have a full 2 1/4 exhaust incl. hi-flow cat from the
engine pipes back and have done a 4 inch cold air induction from the
front grill straight through to a K&N filter. My next move is a port
and polish. Has anyone out there had one on their sooby, or know
someone who has, and has it made a considerable difference. The guy
has told me it will give me 10 - 15 more KW so i'm guessing it'll be
pretty good. Any suggestions on what else i can do to a non-turbo for
more power please reply.

Thanks George. OZ



To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .






<http://rd.yahoo.com/M=201621.1431180.30 ... yahoo.com/>
<http://us.a1.yimg.com/us.yimg.com/i/space.gif!>
www.
<http://us.adserver.yahoo.com/l?M=201621 ... =983379830>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .