Page 1 of 1
Portland, OR ISO EJ20G FUEL RAILS
Posted: Fri Jun 16, 2017 8:30 am
by YetiSmasher
I need some ej20g fuel rails asap! This is the last step in my build. If anybody has some leads please contact me
Re: Portland, OR ISO EJ20G FUEL RAILS
Posted: Fri Jun 16, 2017 8:32 am
by robertpaige
What injectors are you using? If they're greytop 440's, 92-94 NA legacy rails work and they're plentiful in the junk yard
If you're using yellow 550 STi side feeds, 90-91 NA legacy rails will work. As well as EJ25D rails.
Sent from my iPhone using Tapatalk
Re: Portland, OR ISO EJ20G FUEL RAILS
Posted: Fri Jun 16, 2017 11:48 pm
by mike-tracy
He's got a dohc manifold
Re: Portland, OR ISO EJ20G FUEL RAILS
Posted: Wed Jun 21, 2017 9:22 am
by YetiSmasher
Exactly. I was able to source some in Vancouver, but the previous owner had cut the end where the FPR is. Now I have to figure out how to weld a new flange on.
Re: Portland, OR ISO EJ20G FUEL RAILS
Posted: Wed Jun 21, 2017 1:36 pm
by cj91legss
YetiSmasher wrote:Exactly. I was able to source some in Vancouver, but the previous owner had cut the end where the FPR is. Now I have to figure out how to weld a new flange on.
Do you have any places local that make stainless steel braided lines? A shop like that will likely have the equipment to braze a new flange onto your fuel rails.
Re: Portland, OR ISO EJ20G FUEL RAILS
Posted: Fri Jun 23, 2017 6:50 pm
by YetiSmasher
Got everything hooked up. Hopefully I'll be firing her up today