legacycentral bbs

Just wanted to see if what is the best way to put an engine oil cooler on
the the EJ22T. Our Rally car was running pretty warm at the Pacific Forest
Rally (2nd Place!!). I checked the regs, and it allows an oil cooler to be
fitted, so I now want to put one in. I have some really nice coolers
already, but I was wondering what is the best way to plumb it in.

I have seen adapters that go between the filter and engine that then routes
the oil to the cooler. Is there such an adapter? Is it the best way to go?

I am assuming that the 92' Legacy Turbo doesn't already have one....I
couldn't see it readily, but I never looked very hard either.

Thanks for any info!

Rabin
DBR Racing


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/47cccB/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Why not just start with the stock oil cooler?

01 = my two bits

-Sambo



-----Original Message-----
From: Rabin James [mailto:rabinjames@sk.sympatico.ca]
Sent: Sunday, September 23, 2001 6:55 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Engine Oil cooler install info needed....


Just wanted to see if what is the best way to put an engine oil cooler on
the the EJ22T. Our Rally car was running pretty warm at the Pacific Forest
Rally (2nd Place!!). I checked the regs, and it allows an oil cooler to be
fitted, so I now want to put one in. I have some really nice coolers
already, but I was wondering what is the best way to plumb it in.

I have seen adapters that go between the filter and engine that then routes
the oil to the cooler. Is there such an adapter? Is it the best way to go?

I am assuming that the 92' Legacy Turbo doesn't already have one....I
couldn't see it readily, but I never looked very hard either.

Thanks for any info!

Rabin
DBR Racing



To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com








------------------------ ---------------------~-->

Monitoring Service trial
http://us.click.yahoo.com/MDsVHB/bQ8CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

So...the Turbo's already have one I take it.

Where exactly is the cooler located? If they have a stock cooler, then I'll
just replace the cooler with a better one. Temps were hovering around 260 F
which isn't bad, but too high for my tastes. Thanks,

Rabin
DBR Racing

----- Original Message -----
From: "Samuel Barrett" <LEVATHIAN@sprintmail.com>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Sunday, September 23, 2001 88 PM
Subject: RE: [BC-BFLegacyWorks] Engine Oil cooler install info needed....


> Why not just start with the stock oil cooler?
>
> 01 = my two bits
>
> -Sambo
>
>
>
> -----Original Message-----
> From: Rabin James [mailto:rabinjames@sk.sympatico.ca]
> Sent: Sunday, September 23, 2001 6:55 PM
> To: BC-BFLegacyWorks@yahoogroups.com
> Subject: [BC-BFLegacyWorks] Engine Oil cooler install info needed....
>
>
> Just wanted to see if what is the best way to put an engine oil cooler on
> the the EJ22T. Our Rally car was running pretty warm at the Pacific
Forest
> Rally (2nd Place!!). I checked the regs, and it allows an oil cooler to
be
> fitted, so I now want to put one in. I have some really nice coolers
> already, but I was wondering what is the best way to plumb it in.
>
> I have seen adapters that go between the filter and engine that then
routes
> the oil to the cooler. Is there such an adapter? Is it the best way to
go?
>
> I am assuming that the 92' Legacy Turbo doesn't already have one....I
> couldn't see it readily, but I never looked very hard either.
>
> Thanks for any info!
>
> Rabin
> DBR Racing
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
>


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/47cccB/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Hey Rabin,
The factory 2.0 oil cooler setup goes between the block and the oil filter.
The setup is on my car, but no oil cooler is installed.
Mark

At 07:55 PM 23/09/2001 -0600, you wrote:
>Just wanted to see if what is the best way to put an engine oil cooler on
>the the EJ22T. Our Rally car was running pretty warm at the Pacific Forest
>Rally (2nd Place!!). I checked the regs, and it allows an oil cooler to be
>fitted, so I now want to put one in. I have some really nice coolers
>already, but I was wondering what is the best way to plumb it in.
>
>I have seen adapters that go between the filter and engine that then routes
>the oil to the cooler. Is there such an adapter? Is it the best way to go?
>
>I am assuming that the 92' Legacy Turbo doesn't already have one....I
>couldn't see it readily, but I never looked very hard either.
>
>Thanks for any info!
>
>Rabin
>DBR Racing
>
>
>
>To unsubscribe from this group, please send an email to:
>BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>


------------------------ ---------------------~-->

Monitoring Service trial
http://us.click.yahoo.com/MDsVHB/bQ8CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com