For the front I have a Whiteline brace... there is nothing available
for the back, but as Josh says, the back is pretty stiff already.
Bigger swaybars are available for the front and rear. Your part
number from Whiteline is KSB550, and their US distributer is
www.mofugas.com
This part is _almost_ a perfect fit, but I had to mount it, drive a
little, then tighten it down. It wouldn't tighten down all the way
until I wiggled it around a little by driving.
--- In BC-BFLegacyWorks@y..., "Josh Colombo" <josh@s...> wrote:
> May want to check out i-club.....there may be someone sellin one on
there.....but most likely it would be for an impreza.....so not sure
how much that helps.
>
> You really don't need one for the rear if you have a sedan. The
strut towers are close around the car's interior cabin. On the ones
that don't have rear fold down seats, there is actually a bracing bar
already back there.....not sure how much it helps though.
>
> I suppose you could wiggle one in there.....but I don't know of
anyone that makes one for the sedans. I know if you have a wagon,
you will notice a difference, it would help more.
>
> Josh
>
> -----Original Message-----
> From: Nissan-Subaru [mailto:nissans14@y...]
> Sent: Wed 3/6/2002 6:27 AM
> To: BC-BFLegacyWorks@y...
> Cc:
> Subject: [BC-BFLegacyWorks] strut tower bar
>
>
>
> anyone know where i can get a front strut tower bar
> for cheap?
>
> do they make rear ones for a sedan?
>
>
> thanks
> John
> 91 spt sedan
>
> __________________________________________________
> Do You Yahoo!?
> Try FREE Yahoo! Mail - the world's greatest free email!
>
http://mail.yahoo.com/
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@e...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
------------------------ ---------------------~-->
Access Your PC from Anywhere
It's Easy. It's Fun. - Free Download.
http://us.click.yahoo.com/kmECdA/7XkDAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com