I have a 90 Legacy in excellent condition except for the drive train. I have a wrecked 95 Legacy with a good engine and tranny. Would I see any problems with swapping the motor? Looks like I might have to change out the intake and then the rear diff to keep the ratios the same??? Any advice is welcome.
Thanks,
95 Legacy EJ22 swap into 90 Legacy
Moderators: Helpinators, Moderators
95 Legacy EJ22 swap into 90 Legacy
Jeremy
1984 GL Wagon D/R 4x4 EA81 (185k)
1990 Legacy Sedan L+ AWD Auto (160k)
1984 GL Wagon D/R 4x4 EA81 (185k)
1990 Legacy Sedan L+ AWD Auto (160k)
-
- Knowledgeable
- Posts: 9809
- Joined: Mon Jun 16, 2003 11:20 pm
- Location: Beverly, MA
Just swap the heads and block in and reuse the rest of the original engine.
Steve
Steve
Midnight in a Perfect World on Amazon or order anywhere. The first book in a quartet chronicling the rise of a man from angry criminal to philanthropist. Midnight... is a distopic noirish novel featuring 'Duchess', a modified 1990 Subaru Legacy wagon.
-
- Knowledgeable
- Posts: 9809
- Joined: Mon Jun 16, 2003 11:20 pm
- Location: Beverly, MA
They should, but I don't know about sensor compatibility. If you just swap the whole deal over (intake, injectors, etc. as they can be removed as a piece) you won't have to worry. However, they may be the same anyway.
Steve
Steve
Midnight in a Perfect World on Amazon or order anywhere. The first book in a quartet chronicling the rise of a man from angry criminal to philanthropist. Midnight... is a distopic noirish novel featuring 'Duchess', a modified 1990 Subaru Legacy wagon.
Isn't the 95 a single exhaust port engine?
Also, the 95 has an EGR valve......So you may run into more complications there.
Also, the 95 has an EGR valve......So you may run into more complications there.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm