Vik,
Are you still making these great tools? If so, I would like to get one.
I have a NA '91 EJ22 legacy engine installed into my VW Vanagon. The free B10 tool does work on these conversion, but I really want an independent scan tool that does not require a laptop. I'm also still trying to get the B10 working on my Vanagon, but think its more of my laptop causing the troubles.
[/u]
Round Two: Standalone scan tools, for non-turbos too
Moderator: Moderators
No I don't believe he is.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Vikash
- Posts: 12517
- Joined: Sun Nov 03, 2002 2:13 am
- Location: USA, OH, Cleveland (sometimes visiting DC though)
- Contact:
I don't plan on building any more in the near future. It really does take a long time and these days I don't find myself with very much of that.
It's also harder to work up the motivation now that I've been screwed out of hundreds of dollars by a fellow board member over this device.
If that changes, I'll be sure to post up here though.
It's also harder to work up the motivation now that I've been screwed out of hundreds of dollars by a fellow board member over this device.
If that changes, I'll be sure to post up here though.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
That's a real shame to hear. This tool is hands down the coolest thing on my car. I truley lose sleep over the thought of mine dying from years of use and you not being around so I can buy another.
But that aside - WELCOME BACK!
But that aside - WELCOME BACK!
Lee
93' SS, 5mt swapped, 182k, not stock...
96' N/A OBW 5sp, 212k, Couple mods... RIP
99' N/A OBW, 4eat, mostly stock.
93' SS, 5mt swapped, 182k, not stock...
96' N/A OBW 5sp, 212k, Couple mods... RIP
99' N/A OBW, 4eat, mostly stock.
-
- First Gear
- Posts: 186
- Joined: Sat Sep 12, 2009 4:01 am
- Location: Richmond, VA
Just read through the thread for the first time and the "scan tool" looks awesome! i know that you aren't making them any longer and I wanted to know if the plans to work one up were floating around out in cyberspace somewhere, or if you could recommend a similar tool. Having been a tech years ago, I miss the ability to scan problems and scope out what's going on with the car. Any advice would be greatly appreciated, thanks.
"All four wheels spin? Huh, that's AWD..."
*1991 Legacy wagon, 4EAT, n/a*
*1966 Chevrolet C-10 pick-'em-up*
*1991 Legacy wagon, 4EAT, n/a*
*1966 Chevrolet C-10 pick-'em-up*