I've tried searching a bit but am a little confused.
The fuel rails are different between the 1st gen NA and Turbo legacies, yes? Are _either_ of these styles the same as the '95 and up EJ22 fuel rails?
I have a 2nd gen NA ej22 manifold. If I want to use EJ22T (pink) injectors, which fuel rails do I need? If the pink ej22T injectors won't fit in my existing '95 EJ22 rails, is there an alternate injector which flows the same 370CC/min which will fit?
Are the intake manifolds the same between the generations of EJ22s?
Confused about fuel rail, injectors and manifold interchange
Moderators: Helpinators, Moderators
-
- In Neutral
- Posts: 16
- Joined: Wed May 08, 2013 11:15 pm
Re: Confused about fuel rail, injectors and manifold interch
all the manifolds interchange between ej22s, there were differences in the later years but all the rails will interchange as should the injectors
Sent from my ADR6425LVW using Tapatalk
Sent from my ADR6425LVW using Tapatalk
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: Confused about fuel rail, injectors and manifold interch
Yeah, check using 22t rails and injectors in your manifold.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
-
- In Neutral
- Posts: 16
- Joined: Wed May 08, 2013 11:15 pm
Re: Confused about fuel rail, injectors and manifold interch
Thanks, guys. So, as long as the injectors match the fuel rails, they will bolt up to any of the Phase I ej22 intakes.
Re: Confused about fuel rail, injectors and manifold interch
Some of the first gen legacies used spacers between the fuel rail mounting tabs and the intake manifold mounting holes. This will primarily depend on the manifold, so if the existing manifold doesn't have them, you shouldn't need them.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- First Gear
- Posts: 79
- Joined: Wed Feb 27, 2013 7:46 am
- Location: Near Syracuse NY and Potsdam NY
Re: Confused about fuel rail, injectors and manifold interch
Hey guys, hankosolder have you been able to confirm this? In the next couple of weeks I'll be starting my turbo build and I need to get injectors and rails and want to make sure that if I get 22T rails and injectors that they will bolt onto my 2.2NA manifold.
Thanks in advance for the help guys!
Thanks in advance for the help guys!
'99 Outback Rio Red 5-speed (sold)
'06 Legacy GT GRP 5-speed (stock) My road-warrior ~1K miles a week! (sold)
'93 Legacy L Sedan (Project car) RWD, turbo-swapped, manual-swapped (sold)
'12 Golf TDI 4-door 6MT (Subaruless)
'06 Legacy GT GRP 5-speed (stock) My road-warrior ~1K miles a week! (sold)
'93 Legacy L Sedan (Project car) RWD, turbo-swapped, manual-swapped (sold)
'12 Golf TDI 4-door 6MT (Subaruless)
-
- In Neutral
- Posts: 16
- Joined: Wed May 08, 2013 11:15 pm
Re: Confused about fuel rail, injectors and manifold interch
I received the EJ22T injectors and rails. They look like they'll drop right in to my NA manifold, but I have not actually done it yet. I don't anticipate any issues.
Re: Confused about fuel rail, injectors and manifold interch
As noted above, there isn't any issue/difference with the rails, they'll drop right in.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm