drilling/tapping 25d heads for turbo
Moderators: Helpinators, Moderators
drilling/tapping 25d heads for turbo
I once found a thread (I think it was on here) with pictures and a step by step on drilling/tapping the 25d heads for turbo oil/coolant, and now I cant find it. Any ideas?
-
- Fourth Gear
- Posts: 1232
- Joined: Tue Jul 31, 2012 10:32 pm
- Location: Portland, Oregon.
Re: drilling/tapping 25d heads for turbo
Try this. Also most shops can drill and tap a spot on the head for oil.
http://bbs.legacycentral.org/viewtopic.php?f=5&t=44327
http://bbs.legacycentral.org/viewtopic.php?f=5&t=44327
the guy who had the really low winestone SS on the corvette wheels
Re: drilling/tapping 25d heads for turbo
thats the one! thanks! Mine have already been Drilled/tapped, I was seeing how they connected the lines as the factory oil return is press fit.
Re: drilling/tapping 25d heads for turbo
This one has better pics than mine: http://bbs.legacycentral.org/viewtopic.php?p=286475
And there's another one on here - page 3: http://bbs.legacycentral.org/viewtopic. ... 0&start=50
GL,
TD
And there's another one on here - page 3: http://bbs.legacycentral.org/viewtopic. ... 0&start=50
GL,
TD
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T