STi Flywheel

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

STi Flywheel

Post by 555BCTurbo »

I were wondering, would the WRX STi Flywheel, Clutch and Pressure plate fit an EJ22T?!?!? I kinda found one for real cheap, so it would be a nice upgrade I reckon.
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
Top
Legacy777
Site Admin
Site Admin
Posts: 27930
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Contact Legacy777

Post by Legacy777 »

no, pretty sure it won't.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Top
BAC5.2
Moderator
Moderator
Posts: 9026
Joined: Thu Jan 29, 2004 8:47 pm
Location: Maryland www.andrewtechautomotive.com
Contact:
Contact BAC5.2

Post by BAC5.2 »

Nope, the USDM 6-MT flywheel and clutch are to large to fit inside a stock bellhousing.

You CAN mill the transmission out slightly to clear the flywheel, but that would bring the cost to above that of a WRX flywheel.

The WRX Flywheel and clutch (you have to use both) WILL bolt up, though. I'm running it now!!!11!!
2009 Outback 2.5XT. 5MT. Satin White Pearl.
2009 Impreza 2.5i Premium. Blue.

[quote="scottzg"]...I'm not a fan of the vagina...[/quote][quote="evolutionmovement"]This will all go much easier if people stop doubting me.[/quote]
Top
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

Thanks guys...
Guess its good I didn't buy it then!
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
Top
Post Reply

Return to “Drivetrain”