Show us your Legacy pictures and videos.
Moderator: Moderators
ericS2the6
First Gear
Posts: 217 Joined: Sat Oct 19, 2002 5:36 am
Post
by ericS2the6 » Thu Jun 19, 2003 1:13 am
hello
i havent had the time to install the sides yet, hopefully next week. the rear was a piece of cake, 15 min doing all by myself, easily a 5 min job with a friend. the sides are another story however.
the car looks much better even with just the rears on, actually i cant believe how good the car looks.
sizing her up
entirelyturbo
quasi-mod-o
Posts: 6000 Joined: Thu Dec 05, 2002 7:06 pm
Location: Tampa, FL
Post
by entirelyturbo » Thu Jun 19, 2003 4:01 am
Eric, they look excellent!!! That's what I love, when someone takes a body modification and makes it look better-than-factory, but was put on with factory-quality!
I LOVE THEM!!!
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including
Facebook ,
Instagram ,
Twitter , and
TikTok
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Thu Jun 19, 2003 6:51 am
Is that the same rear skirt for the wagon? Regardless, what's the part number for it and how much did you pay, if you don't mind
-Brian
'04 PSM FXT
georryan
Fourth Gear
Posts: 2097 Joined: Thu Oct 17, 2002 1:39 am
Location: USA Bellingham WA
Post
by georryan » Fri Jun 20, 2003 1:34 am
were did you get your skirts?
91 Pearl White Sport Sedan
04 Java Black Pearl Forester XT
2014 Volvo S60 T5
18 KTM 1290 Adventure S
87 Grey GL-10 Sedan (so long old buddy) - donated
97 Toyota 4Runner SR5 - sold
2002 BMW r1150rt-p - sold
2004 BMW r1200ST - sold
2016 BMW r1200RS - sold
ericS2the6
First Gear
Posts: 217 Joined: Sat Oct 19, 2002 5:36 am
Post
by ericS2the6 » Fri Jun 20, 2003 3:29 am
i got the skirts from sub-a-roo auto spares in new zealand. after searching the entire new zealand yellow pages, and contacting all places for quotes, they were by far the cheapest (by almost half from some other places
).
i highly recommend them, they shipped out the next morning, and i recieved them a week later. cost was a little over 300 for everything shipped. a bit cheaper if you dont get the express mail.
the rear is different for the wagon, although i am sure they have them too. the sides are the same however.
to contact them:
subaroo@xtra.co.nz
HomeSlice
Third Gear
Posts: 836 Joined: Wed Oct 16, 2002 4:47 am
Location: ny
Post
by HomeSlice » Fri Jun 20, 2003 8:38 am
looks yummy-
--im still trying to find a set cheap
MY93BC Legacy Sonora Sand---> black plasti-dip?
MY93GC Impreza Amethyst--> Glacier/aspen/pd White
93BC"edm" 93GC 90BC R.I.P.
Legacy777
Site Admin
Posts: 27930 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Fri Jun 20, 2003 1:33 pm
Are the pics you have with them on?
I see the one laying on the ground, but I didn't really notice anything on the car for the other side.
Can you take some closer pics of the rear, I just don't seem to notice the rear one.
There's nothing for the front in this kit is there?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
LegacyT
Fourth Gear
Posts: 1220 Joined: Mon Oct 21, 2002 9:53 pm
Location: Ottawa, Ontario, Canada, Now Sioux Lookout
Post
by LegacyT » Fri Jun 20, 2003 2:02 pm
Legacy777: The US turbo (and Canadian) models all got the nicer front bumper with the moulded in lip.
ericS2the6: Looks great, just need to be painted
1991 Turbo Sedan, Aspen White 5MT, Sold RIP
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
Legacy777
Site Admin
Posts: 27930 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Fri Jun 20, 2003 6:58 pm
Yeah I figured the skirt area in the front would be in the bumper.
But on the sides and rear, there are ones that can be put on.....correct?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Fri Jun 20, 2003 7:24 pm
Yep, you are correct Josh. Only the front lip is attached. It's only attached because it's part of the turbo bumper.
-Brian
'04 PSM FXT
Legacy777
Site Admin
Posts: 27930 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Fri Jun 20, 2003 8:07 pm
The rear piece, is that a stick on job, or are there bolts/screws?
It's hard to notice it in the pics above, if it's on there.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
LegacyT
Fourth Gear
Posts: 1220 Joined: Mon Oct 21, 2002 9:53 pm
Location: Ottawa, Ontario, Canada, Now Sioux Lookout
Post
by LegacyT » Fri Jun 20, 2003 9:04 pm
the back bolts right on, we over here even got the mounting holes moulded into the bumper, Just SOA/SOC were too lazy to give us the damn rear lips
1991 Turbo Sedan, Aspen White 5MT, Sold RIP
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Fri Jun 20, 2003 11:23 pm
They actually gave us the lips on a few models. IIRC, the '94 Legacy GT came with a rear skirt as well as a few other wierd models.
-Brian
'04 PSM FXT
ericS2the6
First Gear
Posts: 217 Joined: Sat Oct 19, 2002 5:36 am
Post
by ericS2the6 » Sat Jun 21, 2003 1:13 am
more pics
note the side skirts are not installed
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Mon Jun 23, 2003 6:07 am
Very nice! It looks really good with that rear skirt.
-Brian
'04 PSM FXT