Engine died

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
subbypwr
In Neutral
Posts: 2
Joined: Thu Aug 25, 2005 12:18 am

Engine died

Post by subbypwr »

I currently have a 98 Legacy GT with a 2.5 motor that recently blew up. :( A friend of mine has a used car garage and he has a 96 Legacy with a 2.2 motor in it. I was wondering if that engine will fit and what i would have to do to get it to work in my car. Can anyone help me?
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

It'll physically fit, however there may be some electrical differences. Anything is possible, it just requires time and money to figure things out.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
subbypwr
In Neutral
Posts: 2
Joined: Thu Aug 25, 2005 12:18 am

Post by subbypwr »

I was thinking that if i swap all sensors off the 2.5 motor and put them on the 2.2, that is if it is possible. I looked at a couple of sensors and they will work but im not sure if all of them will. Then i will swap alt., A/C compressor, and so on. Im gonna check more into later on.
Post Reply