97 Legacy code1507 idles? misses. Any Sub. techs

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
Wayne1ss
In Neutral
Posts: 2
Joined: Sat Oct 15, 2005 8:45 pm

97 Legacy code1507 idles? misses. Any Sub. techs

Post by Wayne1ss »

HI
Have a 97 awd Legacy wag. 2.2 non turbo . When 1st started it idles 2500 rpm. runs ok then . after 30 seconds? it slows down, quickly + misses. The back cyls. 3,4 are ok. But 1,2 show no power output. Spark ok, ck compresion in 1 cyl 125 psi ok. sounds like the injectors are still clicking, listening w/a screw driver. 1507, is supposed to be in the idle air control solenoid. Will it make it miss also ?? Could not find any vacuum leaks ,either . :?
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

Your message is a little cryptic....please try to use complete sentances.

How did you check to see whether cylinders 1 & 2 show no power?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Wayne1ss
In Neutral
Posts: 2
Joined: Sat Oct 15, 2005 8:45 pm

Fixed i believe

Post by Wayne1ss »

I put a used IAC solenoid on it . Only ran it a few miles but seems ok. Better then the 30 seconds till it started missing etc, .Still doesn't make much sense.. ,
Post Reply