Engine mods parts needed valve, spring, retainers?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
waldo320
Second Gear
Posts: 326
Joined: Wed Jan 05, 2005 1:41 am
Location: Akron, OHIO

Engine mods parts needed valve, spring, retainers?

Post by waldo320 »

Hey all well tearing the engine apart and I am in need of some parts, and was wondering what the best place would be to buy some at, valves for a 94 NA stock are fine, and I am corect that the valve seats come on the valves and are not 2 separt parts, next cams defintly some performace based ones, next valve springs and retainers, or what about some stock springs with titanium retainers, and finally some arps they only sell kits for our cars for 200$ plus but I just want the head bolts. So if you could let me know were the cheapest places to buy these parts are it would be most apreciated. Thanks
skid542
Fifth Gear
Posts: 2857
Joined: Fri Dec 26, 2003 6:37 am
Location: North Idaho

Post by skid542 »

It sounds like you're rebuilding but I'm tearing down my old 93' NA and anything on the upper end is fair game so if you want an extra set of cams or anything like that let me know.

But to answer your question, Delta Cams does good performance grinds and I'm sure they have the rest of what you're looking for.
Lee

93' SS, 5mt swapped, 182k, not stock...
96' N/A OBW 5sp, 212k, Couple mods... RIP
99' N/A OBW, 4eat, mostly stock.
Post Reply