Heads, valves, pistons, rods, crankshaft, etc...
Moderators: Helpinators , Moderators
Threshld1
Second Gear
Posts: 529 Joined: Mon Dec 26, 2005 12:53 amLocation: Artic Tundra - MN
Contact:
Post
by Threshld1 Mon Feb 13, 2006 11:08 pm
hey so did some extensive reading but couldnt find a direct answer.
IronMonkeyL255
Fourth Gear
Posts: 1902 Joined: Sat Aug 09, 2003 5:02 pmLocation: Woodruff, SC
Post
by IronMonkeyL255 Tue Feb 14, 2006 1:54 am
That's a good question.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
Threshld1
Second Gear
Posts: 529 Joined: Mon Dec 26, 2005 12:53 amLocation: Artic Tundra - MN
Contact:
Post
by Threshld1 Tue Feb 14, 2006 4:12 pm
hmm i would have through i would have just got a resounding no
NuwanD
Second Gear
Posts: 478 Joined: Wed Mar 26, 2003 4:23 amLocation: Troy, Ohio / Toronto, Ontario
Contact:
Post
by NuwanD Thu Feb 16, 2006 3:02 am
i dunno but I believe nico used old 1.8l impreza rails with sti injectors and the legacy intake manifold
Nuwan
azn2nr
Fifth Gear
Posts: 2412 Joined: Sun Nov 30, 2003 8:02 amLocation: salt lake city
Post
by azn2nr Thu Feb 16, 2006 4:50 am
will not fit. there are tons of hardlines attached to the sti lines. use 1.8 rails and sti injectors
-jason
