front end seals
Moderators: Helpinators, Moderators
-
scottzg
- Knowledgeable

- Posts: 2278
- Joined: Tue Jan 28, 2003 8:19 am
- Location: Saint Joe, CA - Redlands, CA
front end seals
so i gotsta do my timing belt, and i might as well change all the front end seals, since im leaking oil amazingly badly when i don't run goop. What all seals are back there? Would someone mind posting a shopping list?
[url=http://www.thawa.net/gallery/albums/album108/DSCF0330.jpg]90 legacy of awesomeness[/url]
-
vrg3
- Vikash
- Posts: 12517
- Joined: Sun Nov 03, 2002 2:13 am
- Location: USA, OH, Cleveland (sometimes visiting DC though)
- Contact:
This might help: http://bbs.legacycentral.org/viewtopic.php?t=982
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
-
thehookeup
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
i agree napphappy...
Basically, Front Main seal. Cam seals.
But most important; the little oil pump o-ring.
And then permatex Ultra Grey for the oil pump.
and water pump( while your in there you might as well do it for a extra 4 dollars)
Basically, Front Main seal. Cam seals.
But most important; the little oil pump o-ring.
And then permatex Ultra Grey for the oil pump.
and water pump( while your in there you might as well do it for a extra 4 dollars)
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
The o-ring seals the oil discharge port between the pump and block.
You can see a pic of the passageway in this pic
http://www.main.experiencetherave.com:8 ... P_2710.JPG
You can see a pic of the passageway in this pic
http://www.main.experiencetherave.com:8 ... P_2710.JPG
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
thehookeup
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
if you order your seals through a subaru dealership they will know what you are talking about. its a small O-Ring at the discharge between block and the pump. look at the link
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
-
entirelyturbo
- quasi-mod-o

- Posts: 5998
- Joined: Thu Dec 05, 2002 7:06 pm
- Location: Tampa, FL
Crank seal 806733030 $7.98
Cam seals 806732150 $8.02 ($16.04 for two)
O-ring 806919050 $2.67
Those are my list prices.
Tube of black RTV sealant from Advance ~$8-$9
Cam seals 806732150 $8.02 ($16.04 for two)
O-ring 806919050 $2.67
Those are my list prices.
Tube of black RTV sealant from Advance ~$8-$9
1993 Citroën XM Turbo C.T.
1993 Ford Spectron XL-T
1991 Fiat Croma 2.0T i.e.
Another car, soon to be announced
Find me on Facebook, Instagram, X, and TikTok
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
1993 Ford Spectron XL-T
1991 Fiat Croma 2.0T i.e.
Another car, soon to be announced
Find me on Facebook, Instagram, X, and TikTok
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
