seatbelts not working

Anything and Everything about the Body, from paint to undercoating and interior, including in-car entertainment (ICE).

Moderators: Helpinators, Moderators

Post Reply
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

seatbelts not working

Post by crawlerdan »

i bought my legacy with seat belts that are stuck in backwards position, any trick without replacing them?/ i have only found a pass replacement and cant find a drivers replacement yet...this is common as i understand, anything i can do to fix em? i want to retain the automatic belts :)
entirelyturbo
quasi-mod-o
quasi-mod-o
Posts: 6000
Joined: Thu Dec 05, 2002 7:06 pm
Location: Tampa, FL

Post by entirelyturbo »

Is your light on the dash blinking?

I don't know much about them, but it could just be a bad electrical connection. My 91 hasn't done it too much lately, but every once in a while, my auto belt loses its electrical connection, and the light on the dash will start blinking. Sometimes it'll do it when I open or close the door, and the belt will jerk along repeatedly because the connection's weak.
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"

*Formerly DerFahrer*

@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
Legacy777
Site Admin
Site Admin
Posts: 27930
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Post by crawlerdan »

subyluvr2212 wrote:Is your light on the dash blinking?

I don't know much about them, but it could just be a bad electrical connection. My 91 hasn't done it too much lately, but every once in a while, my auto belt loses its electrical connection, and the light on the dash will start blinking. Sometimes it'll do it when I open or close the door, and the belt will jerk along repeatedly because the connection's weak.
yes, the light is blinking, regardless of belt position
Post Reply